
Bioprene hose
Bioprene hose elements. Meets FDA standards, resistant to alcohols, acids and oxidising products.
Hose pump elements
Call +44 1326 370 370
The Bredel CIP 40 and CIP 50 pumps are designed for food manufacture and other processes that require regular clean in place, with all the advantages of low shear, hygienic pumping. Recommended for sanitary processes, or other applications requiring regular cleaning of the process lines.
Max. flow rate continuous | 2311 USGPH |
Volume per revolution | 1.33 - 2.92 L |
Max. continuous operating speed | 50 - 60 rpm |
Max. operating pressure | 16 bar |
Max. operating pressure | 232 psi |
Operating temperature range | -20 - 45 °C |
Operating temperature range | -4 - 113 °F |
Min. starting torque | 320 - 620 N m |
Min. starting torque | 2832 - 5,487 in/lbs |
Weight | 175 - 265 kg |
Hose material | Bioprene, CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR Endurance |
Technical Summary table lists features available within the range. See ‘Technical specifications’ tab for model specific information.
CIP 40 | CIP 50 | |
---|---|---|
Compatible hose materials | Bioprene, CSM, EPDM, F-NBR, NBR, NR, NR Endurance | Bioprene, CSM, EPDM, F-NBR, NBR, NR, NR Endurance |
Flange assembly type | ANSI, DIN, JIS | ANSI, DIN, JIS |
Port configurations | Down, Left, Right, Up | Down, Left, Right, Up |
Max. flow rate continuous | 4788 L/h | 8760 L/h |
Max. flow rate continuous | 1263 USGPH | 2311 USGPH |
Max. flow rate intermittent | 4788 L/h | 8760 L/h |
Max. operating pressure | 16 bar | 16 bar |
Max. operating pressure | 232 psi | 232 psi |
Fluid temperature range | -20 - 80 °C | -20 - 80 °C |
Fluid temperature range | -4 - 176 °F | -4 - 176 °F |
Hose lubricant required | 10 L | 20 L |
Hose lubricant required | 2.6 USG | 5.3 USG |
Max. flow rate intermittent | 1263 USGPH | 2311 USGPH |
Max. inlet pressure | 2.5 bar abs | 2.5 bar abs |
Max. inlet pressure | 37 psia | 37 psia |
Max. continuous operating speed | 60 rpm | 50 rpm |
Max. intermittent operating speed | 60 rpm | 50 rpm |
Min. starting torque | 2832 in/lbs | 5487 in/lbs |
Min. starting torque | 320 N m | 620 N m |
Operating temperature range | -20 - 45 °C | -20 - 45 °C |
Operating temperature range | -4 - 113 °F | -4 - 113 °F |
Volume per revolution | 1.33 L | 2.92 L |
Volume per revolution | 0.35 USG | 0.77 USG |
Weight | 175 kg | 265 kg |
Weight | 386 lbs | 584 lbs |
Please consult your Bredel representative for lower or higher temperature operation.
Allowable ambient temperature is based on pump capabilities and may be further limited by gearbox ambient capabilities.
Type | A | B | C | C | D | Ød | E | F | G | H | H1 | Jmax | K | L | L1 | L2 | M | N | O | Q | R |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bredel CIP 40 (mm) | 702 | 412 | 2.5 | 10 | 430 | 40 | 110 | 454 | 508 | 615 | 325 | 414 | 64 | * | 260 | 80 | 25 | 700 | 25 | 18 | 110 |
Bredel CIP 40 (inches) | 27.6 | 16.2 | 0.1 | 0.4 | 16.9 | 40mm | 4.3 | 17.9 | 20.0 | 24.2 | 12.8 | 16.3 | 2.5 | * | 10.2 | 3.1 | 1.0 | 27.6 | 1.0 | 0.7 | 4.3 |
Type | A | B | C | C | D | Ød | E | F | G | H | H1 | Jmax | K | L | L1 | L2 | M | N | O | Q | R |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bredel CIP 50 (mm) | 835 | 475 | 3 | 10 | 554 | 50 | 123 | 444 | 496 | 760 | 400 | 433 | 78 | * | 325 | 100 | 25 | 870 | 25 | 18 | 125 |
Bredel CIP 50 (inches) | 32.9 | 18.7 | 0.1 | 0.4 | 21.8 | 50mm | 4.8 | 17.5 | 19.5 | 29.9 | 15.7 | 17.0 | 3.1 | * | 12.8 | 3.6 | 1.0 | 34.3 | 1.0 | 0.7 | 4.9 |
Cover assembly | Cast iron |
Hose clamps | Stainless steel 316 |
Hose material | Bioprene, CSM, EPDM, F-NBR, NBR, NBR for food, NR, NR Endurance |
Housing | Cast iron |
Rotor assembly | Cast iron |
Seals | NBR |
Support frame | Galvanised steel, Stainless steel 316 |
Bioprene hose elements. Meets FDA standards, resistant to alcohols, acids and oxidising products.
Hose pump elements
F-NBR hose elements. Suitable for all food products including oils and greases. Meets FDA, EC, EHEDG and 3A standards.
Hose pump elements
CSM hose elements. Outstanding resistance to strong, oxidising products and concentrated acids and bases.
Hose pump elements
Buna N (NBR) hose elements. Resistant to oils, greases, alkalis and detergents.
Hose pump elements
Flow rates to 6,200 L/h (27.3 USGPM) and pressures up to 8 bar (116 psi). Optimised for process uptime.
Pumps - hose pumps
Flow rates to 5,250 L/h (23.1 USGPM) and pressures up to 16 bar (232 psi). Paint-free electroplated pump housing.
Pumps - hose pumps
Flow rates to 17,520 L/h (4,623 USGPH) and pressures up to 16 bar (232 psi). Eliminate ancillary equipment.
Pumps - hose pumps
Flow rates to 108,000 L/h (475 GPM) and pressures up to 16 bar (232 psi). Eliminate ancillary equipment.
Pumps - hose pumps
To order a product or ask a question