Pumps - hose pumps

Bredel hose pumps (65-2100)

Overview

Bredel hose pumps (65-2100)

Bredel hose pumps have no valves or seals to leak, clog or replace and provide flow rates to 108,000 L/h and pressures to 16 bar.

They can pump viscous and abrasive slurries, pastes and sludge, with up to 80 % solids in suspension.

Unlike other pump types, the highly abrasive nature of grit-filled sludge or lime slurry in the environmental market, does not affect peristaltic hose pump life.

Bredel hose pumps eliminate ancillary equipment such as dry run protection, seal water flush systems and in-line check valves. They are also reversible to flush lines.

Chemical Compatibility Guide

Features and benefits

  • Dry running and self-priming
  • No seals, ball-checks, diaphragms, glands, immersed rotors, stators or pistons to leak, clog, corrode or replace
  • Handles abrasive slurries, corrosive acids, gaseous liquids
  • No slippage, allowing true positive displacement for accurate, repeatable metering
  • No ancillary equipment, check valves, sealing water flush systems or run-dry protection required
  • Fully reversible to blow out suction and drain lines safely

Technical summary

Max. flow rate continuous72000 L/h
Max. flow rate continuous18997 USGPH
Volume per revolution6.7 - 40 L
Max. continuous operating speed30 - 50 rpm
Max. operating pressure16 bar
Max. operating pressure232 psi
Min. starting torque1150 - 5,300 N m
Min. starting torque10178 - 46,908 in.lbs
Weight558 - 5,985 kg

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Performance

Bredel 65 performance

Bredel 80 performance

Bredel 100 performance

Bredel 265 performance

Bredel 280 performance

Bredel 2100 performance

Specifications

Technical specifications

Bredel 65Bredel 80Bredel 100Bredel 265Bredel 280Bredel 2100
Max. flow rate continuous20100 L/h28080 L/h36000 L/h40200 L/h56160 L/h72000 L/h
Max. flow rate continuous5303 USGPH7409 USGPH9499 USGPH10607 USGPH14818 USGPH18997 USGPH
Max. flow rate intermittent32160 L/h42120 L/h60000 L/h64320 L/h84240 L/h108000 L/h
Max. flow rate intermittent 8485 USGPH11113 USGPH15831 USGPH16971 USGPH22227 USGPH28496 USGPH
Volume per revolution6.7 L11.7 L20 L13.4 L23.4 L40 L
Volume per revolution1.77 USG3.09 USG5.28 USG3.54 USG6.18 USG10.57 USG
Max. continuous operating speed50 rpm40 rpm30 rpm50 rpm40 rpm30 rpm
Max. intermittent operating speed80 rpm60 rpm50 rpm80 rpm60 rpm45 rpm
Max. operating pressure16 bar16 bar16 bar16 bar16 bar16 bar
Max. operating pressure232 psi232 psi232 psi232 psi232 psi232 psi
Max. inlet pressure2 bar abs1.5 bar abs1.5 bar abs2 bar abs1.5 bar abs1.5 bar abs
Max. inlet pressure30 psi abs23 psi abs23 psi abs30 psi abs23 psi abs23 psi abs
Max. suction capability9.5 mWC9 mWC7 mWC
Max. suction capability 374 inWC354 inWC276 inWC
Suction capability (80% Flow rate)8 mWC7 mWC5 mWC
Suction capability (80% Flow rate)315 inWC276 inWC197 inWC
Operating temperature range -20 °C to 45 °C-20 °C to 45 °C-20 °C to 45 °C-20 °C to 45 °C-20 °C to 45 °C-20 °C to 45 °C
Operating temperature range -4 °F to 113 °F-4 °F to 113 °F-4 °F to 113 °F-4 °F to 113 °F-4 °F to 113 °F-4 °F to 113 °F
Fluid temperature range -20 °C to 80 °C-20 °C to 80 °C-20 °C to 80 °C-20 °C to 80 °C-20 °C to 80 °C-20 °C to 80 °C
Fluid temperature range -4 °F to 176 °F-4 °F to 176 °F-4 °F to 176 °F-4 °F to 176 °F-4 °F to 176 °F-4 °F to 176 °F
Min. starting torque1150 N m2000 N m3100 N m2000 N m3400 N m5300 N m
Min. starting torque10178 in.lbs17701 in.lbs27437 in.lbs17701.5 in.lbs30092 in.lbs46908 in.lbs
Weight558 kg930 kg1300 kg2780 kg4295 kg5985 kg
Weight1230 lbs2050 lbs2866 lbs6129 lbs9469 lbs13195 lbs
Hose lubricant required20 L40 L60 L40 L80 L120 L
Hose lubricant required5.28 USG10.57 USG15.85 USG10.57 USG21.13 USG31.7 USG
Port configurationsDown, Left, Right, Up Down, Left, Right, Up Down, Left, Right, Up Down, Left, Right, Up Down, Left, Right, Up Down, Left, Right, Up 
Compatible hose materialsCSM, EPDM, F-NBR, NBR, NBR for food, NR-Metering, NR-Transfer CSM, EPDM, F-NBR, NBR, NBR for food, NR-Metering, NR-Transfer CSM, EPDM, F-NBR, NBR, NBR for food, NR-Metering, NR-Transfer CSM, EPDM, F-NBR, NBR, NBR for food, NR-Metering, NR-Transfer CSM, EPDM, F-NBR, NBR, NBR for food, NR-Metering, NR-Transfer CSM, EPDM, F-NBR, NBR, NBR for food, NR-Metering, NR-Transfer 
Flange assembly typeANSI, DIN, JIS ANSI, DIN, JIS ANSI, DIN, JIS ANSI, DIN, JIS ANSI, DIN, JIS ANSI, DIN, JIS 
Please consult your Bredel representative for lower or higher temperature operation. Allowable ambient temperature is based on pump capabilities and may be further limited by gearbox ambient capabilities.

Bredel 65 dimensions

Type A B C D E F G H H1 J K Lmax L1 L2max M N O ØP ØQ R S
Bredel 65 (mm) 1059 580 3 746 152 680 740 1036 525 104 137 1172 141 486 415 220 50 18 18 145 4
Bredel 65 (inches) 41.7 22.8 0.12 29.4 6 26.8 29.1 40.8 20.7 4.1 5.4 46.1 5.6 19.1 16.3 8.7 2 0.71 0.71 5.7 0.16
Connector sizes ANSI 150# EN DIN JIS
Bredel 65 2.5" 65mm 65mm

Bredel 80 dimensions

Type A B C D E F G H H1 J K Lmax L1 L2max M N O ØP ØQ R S
Bredel 80 (mm) 1257 700 4 876 182 900 990 1218 620 124 153 1351 166 582 525 275 50 22 18 160 8
Bredel 80 (inches) 49.5 27.6 0.16 34.5 7.2 35.4 39 48 24.4 4.9 6 53.2 6.5 22.9 20.7 10.8 2 0.9 0.71 6.3 0.31
Connector sizes ANSI 150# EN DIN JIS
Bredel 80 3" 80mm 80mm

Bredel 100 dimensions

Type A B C D E F G H H1 J K Lmax L1 L2max M N O ØP ØQ R S
Bredel 100 (mm) 1468 813 3 1042 199 1050 1140 1415 720 151 173 1392 200 489 540 310 50 22 18 180 8
Bredel 100 (inches) 57.8 32 0.12 41 7.8 41.3 44.9 55.7 28.3 5.9 6.8 54.8 7.9 19.3 21.3 12.2 2 0.9 0.71 7.1 0.31
Connector sizes ANSI 150# EN DIN JIS
Bredel 100 4" 100mm 100mm

Bredel 265 dimensions

Type A1 A2 B C D E F G H ØQ R S
Bredel 265 (mm) * 1115 580 3 746 152 720 943 1036 18 145 4
Bredel 265 (inches) * 43.9 22.8 0.12 29.4 5.99 28.3 37.1 40.8 0.71 5.7 0.16

Bredel 280 dimensions

Type A1 A2 B C D E F G H ØQ R S
Bredel 280 (mm) * 1404 700 4 876 182 800 1047 1218 18 160 8
Bredel 280 (inches) * 55.3 27.6 0.16 34.5 7.2 31.5 41.2 48 0.71 6.3 0.31

Bredel 2100 dimensions

Type A1 A2 B C D E F G H ØQ R S
Bredel 2100 (mm) * 1516 813 3 1042 199 916 1218 1415 18 180 8
Bredel 2100 (inches) * 59.7 32 0.12 41 7.8 36.1 48 55.7 0.71 7.1 0.31

Materials of construction

Hose materialCSM, EPDM, F-NBR, NBR, NBR for food, NR-Metering, NR-Transfer
HousingCast iron, ISO12944 category C4M
Rotor assemblyCast iron, ISO12944 category C4M
Cover assemblyCast iron, ISO12944 category C4M
Brackets and fastenersGalvanised steel, Stainless steel 316
Support frameGalvanised steel, Stainless steel 316
Hose clampsGalvanised steel, Stainless steel 316
SealsNeoprene, Nitrile

Literature

Brochures

  1. Tunnel boring (EN).pdf
    PDF - 1.8mb
  2. Bredel pumps (EN).pdf
    PDF - 2.1mb

Datasheet

  1. Bredel 65 datasheet (EN).pdf
    PDF - 1.3mb
  2. Bredel 100 datasheet (EN).pdf
    PDF - 1.3mb
  3. Bredel 2100 datasheet (EN).pdf
    PDF - 1.4mb
  4. Bredel 265 datasheet (EN).pdf
    PDF - 1.2mb
  5. Bredel 280 datasheet (EN).pdf
    PDF - 1.2mb
  6. Bredel 80 datasheet (EN).pdf
    PDF - 1.3mb

Manuals

  1. Bredel 40, 50, 65, 80, 100 manual (EN).pdf
    PDF - 7.8mb
  2. Bredel 265, 280, 2100 manual (EN).pdf
    PDF - 2.7mb

Recommended Products

  1. Natural rubber (NR) Metering hose

    Natural rubber (NR) Metering hose

    Natural Rubber hose elements. Outstanding abrasion resistance. Generally resistant to diluted acids and alcohols.

    Hose pump elements

  2. NBR (Buna N) hose

    NBR (Buna N) hose

    NBR (Buna N) hose elements. Resistant to oils, greases, alkalis and detergents.

    Hose pump elements

  3. EPDM hose

    EPDM hose

    EPDM hose elements. Excellent chemical resistance, especially to ketones, alcohols and concentrated acids.

    Hose pump elements

  4. F-NBR hose

    F-NBR hose

    F-NBR hose elements. Suitable for all food products including oils and greases. Meets FDA, EC, EHEDG and 3A standards.

    Hose pump elements

Related Products

  1. Bredel hose pumps (10-50)

    Bredel hose pumps (10-50)

    Flow rates to 17,520 L/h (4,623 USGPH) and pressures up to 16 bar (232 psi). Eliminate ancillary equipment.

    Pumps - hose pumps

  2. APEX hose pumps

    APEX hose pumps

    Flow rates to 6,200 L/h (27.3 USGPM) and pressures up to 8 bar (116 psi). Optimised for process uptime.

    Pumps - hose pumps

  3. Bredel CIP hose pumps

    Bredel CIP hose pumps

    Flow rates to 8,500 L/h (37 USGPM) and pressures up to 16 bar (232 psi). Food quality hose compliant.

    Pumps - hose pumps

  4. Bredel DuCoNite pumps

    Bredel DuCoNite pumps

    Flow rates to 5,250 L/h (23.1 USGPM) and pressures up to 16 bar (232 psi). Paint-free electroplated pump housing.

    Pumps - hose pumps

Our process pump specialists are here to help you succeed.

To order a product or ask a question

Contact our experts