View the full Certa brewery case study.
Engineers in food and beverage and hygienic solution plants are frequently faced with pumping a wide range of products from high-viscosity orange juice concentrates and bakery products to sheer sensitive products like deli salads, cheese curds and savoury pie fillings. Certa meets the highest standards in hygiene and cleanability combined with improving process efficiency and minimising total cost of ownership.
Cleaner than any lobe or circumferential piston pump
Virtually pulse free
Low shear handling
Lowest cost of ownership
|Max. flow rate||255000 L/h|
|Max. flow rate||1124 USGPM|
|Volume per revolution||0.08 - 10.64 L|
|Volume per revolution||0.021 - 2.81 USG|
|Max. particle size||13 - 100 mm|
|Max. particle size||0.51 - 3.9 in|
|Standards||3-A, ATEX, EHEDG Type El Class I, EHEDG Type EL Class I Aseptic|
|Certification||EC 1935/2004, FDA|
Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.
|Certa 100 / Certa Compact||Certa 200 / Certa Compact||Certa 250 / Certa Compact||Certa 300 / Certa Compact||Certa 400 / Certa Compact||Certa 800|
|Max. flow rate||4800 L/h||7800 L/h||11520 L/h||18000 L/h||41760 L/h||255000 L/h|
|Max. flow rate||21.1 USGPM||34.2 USGPM||50.5 USGPM||78.9 USGPM||183.2 USGPM||1124 USGPM|
|Volume per revolution||0.08 L||0.13 L||0.24 L||0.5 L||1.16 L||10.64 L|
|Volume per revolution||0.021 USG||0.034 USG||0.063 USG||0.132 USG||0.305 USG||2.81 USG|
|Max. particle size||13 mm||18 mm||22 mm||30 mm||38 mm||100 mm|
|Max. particle size||0.51 in||0.71 in||0.87 in||1.18 in||1.5 in||3.9 in|
|Suction pressure||85% of a vacuum||85% of a vacuum||85% of a vacuum||85% of a vacuum||85% of a vacuum||85% of a vacuum|
|Max. operating speed||1000 rpm||1000 rpm||800 rpm||600 rpm||600 rpm||400 rpm|
|Maximum operating pressure||6, 10 bar||6, 10 bar||6, 15 bar||6, 15 bar||6, 15 bar||15 bar|
|Maximum operating pressure||87, 145 psi||87, 145 psi||87, 217 psi||87, 217 psi||87, 217 psi||217 psi|
|Operating temperature range||-20 to 100 °C||-20 to 100 °C||-20 to 100 °C||-20 to 100 °C||-20 to 100 °C||-20 to 100 °C|
|Operating temperature range||-4 to 212 °F||-4 to 212 °F||-4 to 212 °F||-4 to 212 °F||-4 to 212 °F||-4 to 212 °F|
|Max. SIP temperature||121 °C||121 °C||121 °C||121 °C||121 °C||121 °C|
|Max. SIP temperature||250 °F||250 °F||250 °F||250 °F||250 °F||250 °F|
|Standards||3-A, ATEX, EHEDG Type El Class I, EHEDG Type EL Class I Aseptic||3-A, ATEX, EHEDG Type El Class I, EHEDG Type EL Class I Aseptic||3-A, ATEX, EHEDG Type El Class I, EHEDG Type EL Class I Aseptic||3-A, ATEX, EHEDG Type El Class I, EHEDG Type EL Class I Aseptic||3-A, ATEX, EHEDG Type El Class I, EHEDG Type EL Class I Aseptic||3-A, ATEX, EHEDG Type El Class I, EHEDG Type EL Class I Aseptic|
|Certification||EC 1935/2004, FDA||EC 1935/2004, FDA||EC 1935/2004, FDA||EC 1935/2004, FDA||EC 1935/2004, FDA||EC 1935/2004, FDA|
|Port orientation||Various options to meet your requirements||Various options to meet your requirements||Various options to meet your requirements||Various options to meet your requirements||Various options to meet your requirements||Various options to meet your requirements|
|Port type||Flange, Milk fitting, Others available on request, RJT, SMS, TC||Flange, Milk fitting, Others available on request, RJT, SMS, TC||Flange, Milk fitting, Others available on request, RJT, SMS, TC||Flange, Milk fitting, Others available on request, RJT, SMS, TC||Flange, Milk fitting, Others available on request, RJT, SMS, TC||Flange, Milk fitting, Others available on request, RJT, SMS, TC|
|Shaft diameter||28 mm||28 mm||28 mm||50 mm||50 mm||110 mm|
|Shaft diameter||0.98 inch||0.98 inch||0.98 inch||1.97 inch||1.97 inch||4.33 inch|
|Shaft height||3.74 inch||4.31 inch||5.91 inch||6.69 inch||7.87 inch||15.94 inch|
|Shaft height||95 mm||109.5 mm||150 mm||170 mm||200 mm||405 mm|
|N1||N2 Certa||N2 Certa Compact||N3||L1 Certa||L1 Certa Compact||L2 Certa||L2 Certa Compact|
|Certa 100||139||5.472||228 - 25||8.976 - 0.984||220 ± 25||8.661 ± 0.984||10||0.394||265||10.079||122.5||4.823||730||28.740||320||12.598|
|Certa 200||155||6.102||242.5 - 25||5.610 - 0.984||230 ± 25||9.055 ± 0.984||10||0.394||299||11.772||124||4.882||730||28.740||370||14.567|
|Certa 250||192||7.559||281 - 25||11.063 - 0.984||270 ± 25||10.630 ± 0.984||12||0.472||352||13.858||134.5||5.295||850||33.465||400||15.748|
|Certa 300||238||9.370||305 - 35||12.008 - 1.378||263 ± 25||10.354 ± 0.984||18||0.709||456||17.953||149||5.866||1100||43.307||480||18.898|
|Certa 400||324||12.756||322 - 35||12.677 - 1.378||329 ± 25||12.953 ± 0.984||31||1.221||514||20.236||174||6.850||1300||51.181||600||23.622|
|Certa 500||327||12.874||378 - 35||14.882 - 1.378||335 ± 25||13.189 ± 0.984||25||0.984||564||22.205||210||8.268||1300||51.181||600||23.622|
|Certa 600||343||13.504||380 - 35||14.961 - 1.378||352 ± 25||13.858 ± 0.984||28||1.102||639||25.158||252.5||9.941||1400||55.118||650||25.591|
|Certa 100 Compact||25.5||56|
|Certa 200 Compact||34||75|
|Certa 250 Compact||52||115|
|Certa 300 Compact||79.5||175|
|Certa 400 Compact||164.5||363|
|Certa 500 Compact||231.5||510|
|Certa 600 Compact||411||906|
|Housing||Stainless steel 1.4404, Stainless steel 316L|
|Bearing frame||Stainless steel 1.4301, Stainless steel 304|
|Rotor||A276 (CF10SMnN), A494 (CY5SnBiM), Hardened and chrome plated|
|Gate||MWR, PA6GF30, PEEK, Polyamide, POM metal detectable, PTFE, WRP, WRP PUR-Inlay|
|Seals/gaskets||EPDM, FKM, Others available on request|
|Mechanical seal||SiC/Ca-PTFE, SiC/SiC-PTFE|
|Double Mechanical seal||SiC/SiC|
|Shaft seal||PTFE, SSIC|
|O-Ring seal system||FKM|
|Single Lip seal system||PUR|
The European Hygienic Engineering & Design Group (EHEDG) is a consortium of equipment manufacturers, food industries, research institutes as well as public health authorities and was founded in 1989 with the aim to promote hygiene during the processing and packing of food products.
3-A SSI is an independent, not-for-profit corporation dedicated to advancing hygienic equipment design for the food, beverage, and pharmaceutical industries.
FDA is responsible for protecting the public health by assuring the safety, efficacy and security of human and veterinary drugs, biological products, medical devices, our nation’s food supply, cosmetics, and products that emit radiation.
REGULATION (EC) No 1935/2004 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 October 2004 on materials and articles intended to come into contact with food
ATEX Directive (2014/34/EU): Machinery and equipment manufacturers, their authorised representatives, importers, or any persons responsible for placing a product on the market, must ensure that equipment falling under the ATEX Directive (2014/34/EU) prevents, or limits the impact to an adequate level of safety, an ignition of explosive atmospheres. As a visible sign of compliance with ATEX, the CE marking must be affixed to the equipment.
Certa Compact Sine pump
Limited on space?
With a 30% reduction in footprint on the Certa Sine pump from MasoSine, the Certa Compact Sine pump is a compact solution for customers when space for an installation is limited.
As with all Certa Sine pumps, the Certa Compact delivers energy savings as it consumes up to 50% less power than lobe or circumferential pumps with exceptional performance for all applications, including handling highly viscous products.
O-ring seal system
To support customers with clean out of place (COP) processes, Certa pumps are offered with an ergonomic hinge and O-ring seal system. The hybrid system includes a hexagonal locking screw and O-ring seal system to support frequent assembly and disassembly without the need for specialist tools or training. The O-ring seal provides additional protection against system vibration and cavitation.Other options and accessories
The video shows the MasoSine Certa pumps’ ability to clean in place even the toughest substances. For the purposes of this demonstration, mustard has been pumped and allowed to dry. Just cold water without a cleaning agent is then run through the pump, removing all traces of the mustard with ease.
Certa pumps are:
View the full Certa brewery case study.
View full case study on MasoSine pump for peanut butter manufacturing.
Lobe pumps used to transfer yeast at family-owned brewery have been replaced by MasoSine Certa...
Certa three times more energy efficient than pneumatic pumps at transferring double and single...