Pumps - cased pumps

600 series cased pump

Overview

630 series process pumps

630 series process pumps offer four drive options, color display and intuitive menu structures that provide visual status indication and minimal key presses.

Flow rates from 0.0002 GPM to 4.76 GPM depending on model and pumphead/tubing options.

Pumphead options available as standard (others available on request):

  • 620R pumphead for continuous tubing
  • 620RE and 620RE4 pumpheads for tube elements
  • 620L and 620LG twin channel low pulse pumpheads

Features and benefits

  • Color display and intuitive menu structures provide visual status indication and minimal key presses
  • Flow rates from 0.001 L/min (0.0002 USGPM) to 18 L/min (4.76 USGPM) depending on model and pumphead/tubing options
  • 620R, 620RE, 620RE4, 620L and 620LG pumpheads available
  • 2,650:1 speed control range from 0.1 to 265 rpm in 0.1 rpm increments
  • Keypad incorporates 3-level security PIN lock
  • IP31 (NEMA 2) and IP66 (NEMA 4X) cased pumps available
  • Dual voltage, 115 V/230 V 50/60 Hz
  • Remote Analogue/Digital, RS232, RS485, PROFIBUS®, PROFINET®, SCADA and EtherNet/IP™ control options

Technical summary

Max. flow rate 18 L/min
Min. flow rate0.001 L/min
Max. flow rate301 usgph
Min. flow rate0.02 usgph
Drive speed control ratio2650:1 
Operating temperature range 5 to 40 °C
Operating temperature range 41 to 104 °F
Control typesEtherNet/IP™, PROFIBUS®, PROFINET®, Remote Analogue/Digital, RS232, RS485, SCADA 
Drive standardsCE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and loadsure elements) 
Drive ingress protectionIP31, IP66, NEMA 2, NEMA 4X 
Drive power supply100 to 120 V/200 to 240 V 1ph 50/60 Hz 250 VA, 100 V to 120 V/200 V to 240 V 1ph 50/60 Hz 250 VA 
Compatible tubing bore size 6.4, 8, 9.6, 12, 12.7, 15.9, 16, 17 mm

Technical Summary table lists features available within the range. See ‘Technical specifications’ tab for model specific information.

Performance

630 Drive with 620R Pumphead performance

620R twin-roller pumpheads for continuous 3.2 mm wall thickness tubing — Tube bore and flow rates — L/min (USGPH)
Tube material Speed 6.4mm 9.6mm 12.7mm 15.9mm
Marprene® TL, Bioprene® TL 0.1-265rpm 0.001–3.4 (0.02– 53.9) 0.003–6.6 (0.05– 105) 0.004–11 (0.06– 174) 0.005–12 (0.08– 190)
Pumpsil® 0.1-265rpm 0.001–3.2 (0.02– 50.7) 0.003–7.2 (0.05– 114) 0.004–11 (0.06– 174) 0.01–15 (0.16– 238)
GORE® STA-PURE® Pump Tubing – Series PFL 0.1-265rpm 0.001–3.2 (0.02– 50.7) 0.003–6.6 (0.05– 105) 0.004–11 (0.06– 174) 0.006–16 (0.1– 254)

630 Drive with 620RE Pumphead performance

620RE two-roller low-pulse pumpheads for LoadSure elements — Tube bore and flow rates — L/min (USGPH)
Tube material Speed 12mm 17mm
Marprene® TM, Bioprene® TM 0.1-265rpm 0.004–11 (0.06– 174) 0.01–16 (0.16– 254)
Marprene® TL, Bioprene® TL 0.1-265rpm 0.004–11 (0.06– 174) 0.01–18 (0.16– 285)
Pumpsil® 0.1-265rpm 0.004–10 (0.06– 159) 0.01–16 (0.16– 254)
GORE® STA-PURE® Pump Tubing – Series PFL 0.1-265rpm 0.004–11 (0.06– 174) 0.01–19 (0.16– 301)

630 Drive with 620RE4 Pumphead performance

620RE4 four-roller low-pulse pumpheads for LoadSure elements — Tube bore and flow rates — L/min (USGPH)
Tube material Speed 12mm 17mm
Marprene® TM, Bioprene® TM 0.1-265rpm 0.003–8.3 (0.05–132) 0.004–11 (0.06–174)
Marprene® TL, Bioprene® TL 0.1-265rpm 0.003–8.3 (0.05–132) 0.005–12 (0.08–190)
Pumpsil® 0.1-265rpm 0.003–8.7 (0.05–138) 0.004–11 (0.06–174)
GORE® STA-PURE® Pump Tubing – Series PFL 0.1-265rpm 0.003–9 (0.05–143) 0.005–13 (0.08–206)

630 Drive with 620L Pumphead performance

620L twin-channel low-pulse pumpheads for LoadSure elements — Tube bore and flow rates — L/ min (USGPH)
Tube material Speed Y element tubing Continuous tubing (flow per channel - max of 2 channels)
8.0mm 12.0mm 16.0mm 8.0mm 12.0mm 16.0mm
Pumpsil® 0.1-265rpm 0.002–4.4 (0.03–69.7) 0.003–8.5 (0.05–135) 0.005–11.5 (0.08–182) 0.001–2.2 (0.02–34.9) 0.002–4.3 (0.03–68.2) 0.003–5.8 (0.05–91.9)
Marprene® , Bioprene® 0.1-265rpm 0.002–4.5 (0.03–71.3) 0.003–8.0 (0.05–127) 0.005–11.3 (0.08–179) 0.001–2.3 (0.02–36.5) 0.002–4.0 (0.03–63.4) 0.003–5.7 (0.05–90.3)
GORE® STA-PURE® Pump Tubing Series PFL, GORE® STA-PURE® Pump Tubing Series PCS (620LG pumphead only) 0.1-265rpm 0.002–5.2 (0.03–82.4) 0.003–9.0 (0.05–143) 0.005–12.4 (0.08–197) 0.001–2.6 (0.02–41.2) 0.002–4.5 (0.03–71.3) 0.003–6.7 (0.05–106)

630 Drive with 620LG Pumphead performance

620LG twin-channel low-pulse pumpheads for GORE® STA-PURE LoadSure elements — Tube bore and flow rates — L/ min (USGPH)
Tube material Speed Y element tubing Continuous tubing (flow per channel - max of 2 channels)
8.0mm 12.0mm 16.0mm 8.0mm 12.0mm 16.0mm
GORE® STA-PURE® Pump Tubing Series PFL, GORE® STA-PURE® Pump Tubing Series PCS (620LG pumphead only) 0.1-265rpm 0.002–5.2 (0.03–82.4) 0.003–9.0 (0.05–143) 0.005–12.4 (0.08–197) 0.001–2.6 (0.02–41.2) 0.002–4.5 (0.03–71.3) 0.003–6.7 (0.05–106)

Specifications

Technical specifications

630 Drive with 620R Pumphead630 Drive with 620RE Pumphead630 Drive with 620RE4 Pumphead630 Drive with 620L Pumphead630 Drive with 620LG Pumphead
Pumphead number of rollers
Pumphead number of channels
Max. flow rate 16 L/min18 L/min13 L/min13.3 L/min13.3 L/min
Min. flow rate0.001 L/min0.004 L/min0.003 L/min0.002 L/min0.002 L/min
Max. flow rate254 USGPH301 USGPH206 USGPH211 USGPH211 USGPH
Min. flow rate0.02 USGPH0.06 USGPH0.05 USGPH0.03 USGPH0.03 USGPH
Max. flow rate4.76 USGPM4.76 USGPM4.76 USGPM4.76 USGPM4.76 USGPM
Min. flow rate0.0002 USGPM0.0002 USGPM0.0002 USGPM0.0002 USGPM0.0002 USGPM
Drive speed control ratio2650:1 2650:1 2650:1 2650:1 2650:1 
Drive speed 0.1 - 265 rpm0.1 - 265 rpm0.1 - 265 rpm0.1 - 265 rpm0.1 - 265 rpm
Operating temperature range 5 to 40 °C5 to 40 °C5 to 40 °C5 to 40 °C5 to 40 °C
Operating temperature range 41 to 104 °F41 to 104 °F41 to 104 °F41 to 104 °F41 to 104 °F
Weight19.6 - 20.5 kg19.6 - 20.5 kg20.1 - 21 kg24.3 - 25.2 kg24.3 - 25.2 kg
Weight43.2 - 45.2 lbs43.2 - 45.2 lbs44.3 - 46.3 lbs53.6 - 55.6 lbs53.6 - 55.6 lbs
Drive weight 16.5, 17.4 kg16.5, 17.4 kg16.5, 17.4 kg16.5, 17.4 kg16.5, 17.4 kg
Drive weight 36.4, 38.5 lbs36.4, 38.5 lbs36.4, 38.5 lbs36.4, 38.5 lbs36.4, 38.5 lbs
NEMA module weight0.9 kg0.9 kg0.9 kg0.9 kg0.9 kg
NEMA module weight2 lbs2 lbs2 lbs2 lbs2 lbs
Control typesEtherNet/IP™, PROFIBUS®, PROFINET®, Remote Analogue/Digital, RS232, RS485, SCADA EtherNet/IP™, PROFIBUS®, PROFINET®, Remote Analogue/Digital, RS232, RS485, SCADA EtherNet/IP™, PROFIBUS®, PROFINET®, Remote Analogue/Digital, RS232, RS485, SCADA EtherNet/IP™, PROFIBUS®, PROFINET®, Remote Analogue/Digital, RS232, RS485, SCADA EtherNet/IP™, PROFIBUS®, PROFINET®, Remote Analogue/Digital, RS232, RS485, SCADA 
Drive control optionsBp, BpN, Du, DuN, DuS, En, EnN, Pn, PnN, S, SN, U, UN, US Bp, BpN, Du, DuN, DuS, En, EnN, Pn, PnN, S, SN, U, UN, US Bp, BpN, Du, DuN, DuS, En, EnN, Pn, PnN, S, SN, U, UN, US Bp, BpN, Du, DuN, En, EnN, Pn, PnN Bp, BpN, Du, DuN, En, EnN, Pn, PnN 
Drive standardsCE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and loadsure elements) CE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and loadsure elements) CE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and loadsure elements) CE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and loadsure elements) CE, cETLus, C-Tick, IRAM, NSF/ANSI 61 (for Marprene tubing and loadsure elements) 
Drive ingress protectionIP31, IP66, NEMA 2, NEMA 4X IP31, IP66, NEMA 2, NEMA 4X IP31, IP66, NEMA 2, NEMA 4X IP31, IP66, NEMA 2, NEMA 4X IP31, IP66, NEMA 2, NEMA 4X 
Drive humidity(Non-condensing) 80% up to 31°C (88°F), decreasing linearly to 50% at 40C (104F) (Non-condensing) 80% up to 31°C (88°F), decreasing linearly to 50% at 40C (104F) (Non-condensing) 80% up to 31°C (88°F), decreasing linearly to 50% at 40C (104F) (Non-condensing) 80% up to 31°C (88°F), decreasing linearly to 50% at 40C (104F) (Non-condensing) 80% up to 31°C (88°F), decreasing linearly to 50% at 40C (104F) 
Drive noise<70dB(A) at 1m <70dB(A) at 1m <70dB(A) at 1m <70dB(A) at 1m <70dB(A) at 1m 
Max. altitude2000 m2000 m2000 m2000 m2000 m
Drive power supply100 to 120 V/200 to 240 V 1ph 50/60 Hz 250 VA, 100 V to 120 V/200 V to 240 V 1ph 50/60 Hz 250 VA 100 to 120 V/200 to 240 V 1ph 50/60 Hz 250 VA, 100 V to 120 V/200 V to 240 V 1ph 50/60 Hz 250 VA 100 to 120 V/200 to 240 V 1ph 50/60 Hz 250 VA, 100 V to 120 V/200 V to 240 V 1ph 50/60 Hz 250 VA 100 to 120 V/200 to 240 V 1ph 50/60 Hz 250 VA, 100 V to 120 V/200 V to 240 V 1ph 50/60 Hz 250 VA 100 to 120 V/200 to 240 V 1ph 50/60 Hz 250 VA, 100 V to 120 V/200 V to 240 V 1ph 50/60 Hz 250 VA 
Compatible tubing bore size 6.4, 9.6, 12.7, 15.9 mm12, 17 mm12, 17 mm8, 12, 16 mm8, 12, 16 mm

630 Drive with 620R Pumphead dimensions

630 Drive with 620RE Pumphead dimensions

630 Drive with 620RE4 Pumphead dimensions

630 Drive with 620L Pumphead dimensions

630 Drive with 620LG Pumphead dimensions

Materials of construction

BearingsCarbon steel
DriveshaftStainless steel 440C
Drive caseworkPressure die-cast aluminum LM24, Pressure die-cast aluminum LM6
Drive casework coatingExterior grade polyester powder coat
Guide roller assemblyMoS2 filled Nylon 6 (Nylatron), Stainless steel 303, Stainless steel 316
Drive keypad/HMIPolyester
Pumphead front/back platesAluminum alloy HS30
Drive rear blanking plateStainless steel 316
Pumphead body assemblyAlocrom pre-treatment, Aluminum alloy NS4 anodized, Exterior grade polyester powder coat, Polyester epoxy powder, Powder coated aluminum LM24, Pressure die-cast aluminum LM24
Pumphead guardAlocrom pre-treatment, Exterior grade polyester powder coat, Pressure die-cast aluminum LM24
Pumphead roller assemblyFortron 1140L4 (PPS), MoS2 filled Nylon 6 (Nylatron), Stainless steel 303, Stainless steel 316
Pumphead rotor assemblyAluminum alloy HE30, Dupont Hytrel G5544, Fortron 1140L4 (PPS)
Pumphead trackAluminum alloy NS4 anodized, Powder coated aluminum LM24
SpindlesStainless steel 303S31
Switch-plateABS PA-765
Tube clamp assemblyAluminum alloy HE30, Polypropylene

Information listed covers the complete range. For detailed specifications of individual models/components refer to user manual or contact WMFTS representative.

Control

Control options

Key to pump drive models
630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN 630Pn 630PnN
Standard Standard IP66 / NEMA 4X Universal Universal IP66 / NEMA 4X Digital Universal Digital Universal IP66 / NEMA 4X Bus Pump / Profibus Bus Pump / Profibus IP66 / NEMA 4X Universal SCADA / IP66 / NEMA 4X Digital Universal SCADA / IP66 / NEMA 4X EtherNet/IP EtherNet/ IP / IP66 / NEMA 4X PROFINET® PROFINET® / IP66 / NEMA 4X

 

Manual control
Pump drive 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN 630Pn 630PnN
Intuitive keypad and colour display
Choice of flowrate or speed display
Full calibration with choice of flow units
MemoDose function
Auto restart facility
Guard switch detection
Leak detection
Dipensing (Network Control)

 

Remote control
Pump drives 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN 630Pn 630PnN
Configurable Start/Stop, leak detector and pressure switch input via contact closure or 5 V TTL or 24 V industrial logic
Configurable Start/Stop, leak detector and pressure switch input via 110 V industrial logic
Direction change and auto/manual toggle input via contact closure or 5 V TTL or 24 V industrial logic
Direction change and auto/manual toggle input via 110 V industrial logic
Remote operation of MemoDose (foot/hand‑switch or logic input)
Four configurable digital status outputs through 24 V, 30 W relays
Four configurable digital status outputs through 110 V relays
Menu configurable logic outputs
Remote pressure/flow sensors

 

Analogue speed control
Pump drives 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN 630Pn 630PnN
Fully configurable inputs; 0-10 V or 4-20 mA
Analogue outputs; 0-10 V, 4-20 mA
Keypad/analogue input scaling (replacement of diaphragm pumps)
Tacho frequency output; 0-1478 Hz
2x sensor inputs 4-20 mA*

 

Security
Pump drives 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN 630Pn 630PnN
3-level Security PIN lock

 

Network communication
Pump drives 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN 630Pn 630PnN
RS485 network control
RS232 network control

 

Digital pump commands (Profibus / EtherNet/IP)
Pump drives 630S 630SN 630U 630UN 630Du 630DuN 630Bp 630BpN 630US 630DuS 630En 630EnN 630Pn 630PnN
PROFIBUS® DP V0
PROFINET® (CC-B & Netload Class III)
EtherNet/IP™
Communication speeds from 9.6 kbits/s up to 12000 kbits/s
Network speed: 10/100 Mbps - Full Duplex Operation
Network speed: 100 Mbps - Full Duplex Operation
Auto-detect bus speed
Speed set point
Speed feedback
Flow calibration function
Hours run
Revolution counter
Leak detection
Low fluid level alarm
Diagnostic feedback
Flow Totaliser
Sensor scaling
Dispensing (Network Control)**

*Range of 3rd party pressure/flow sensors supported—see compatible sensor list on www.wmftg.com/literature

**Dispensing (Network/Manual) - Store up to 100 recipes locally or via network control. Features include volume, flow rate, anti-drip, ramp and time delays. Run these as batches using local, network or manual keypad control.

Literature

Brochures

  1. Industrial EtherNet flyer (EN).pdf
    PDF - 314.2kb

Datasheet

  1. 630 Drive with 620RE pumphead datasheet (EN).pdf
    PDF - 813.2kb
  2. 630 Drive with 620RE4 pumphead datasheet (EN).pdf
    PDF - 813.3kb
  3. 630 Drive with 620R pumphead datasheet (EN).pdf
    PDF - 823.8kb
  4. 630 Drive with 620LG pumphead datasheet (EN).pdf
    PDF - 792.8kb
  5. 630 Drive with 620L pumphead datasheet (EN).pdf
    PDF - 793.5kb

Manuals

  1. 630 Pn-PnN manual (EN).pdf
    PDF - 3.9mb
  2. 630 S-SN manual (EN).pdf
    PDF - 3mb
  3. 630 Bp-BpN manual (EN).pdf
    PDF - 3mb
  4. 630 En-EnN manual (EN).pdf
    PDF - 4mb
  5. 630 U-UN manual (EN).pdf
    PDF - 4.7mb
  6. 630 Du-DuN manual (EN).pdf
    PDF - 4.7mb

Other Resources

  1. Watson-Marlow 530, 630, 730 EtherNet-IP™ and PROFINET® compatible sensor list (EN).pdf
    PDF - 235.2kb
  2. 530 630 730 Pn PnN GSDML compatibility guide.pdf
    PDF - 43.5kb
  3. 530 630 730 En EnN EDS compatibility guide (EN).pdf
    PDF - 44.7kb
  1. 530-630-730-EtherNetIP-pump-rev-2.5.eds
    EDS - 113.9kb
  1. gsdml-v2.4-watson-marlow-530-630-730-profinet-pump-20230316.zip
    ZIP - 5.6kb

Pumpheads

620RE LoadSure tube element pumphead

  • 620RE is a high-performance, accurate, two-roller pumphead with LoadSure rapid tube element change technology
  • 4mm wall elements in 12mm or 17mm bore sizes allow pressures up to 4bar and flow rates up to 18 liter/min
  • Elements are available with Tri-clamp sanitary fittings; and with Cam and Groove fittings

620RE4 LoadSure tube element pumphead

  • 620RE4 is a high-performance, accurate, four-roller pumphead with LoadSure rapid tube element change technology
  • 4mm wall elements in 12mm or 17mm bore sizes allow pressures up to 4bar and flow rates up to 13 liter/min with minimized pulsation
  • Elements are available with industry-standard tri-clamp sanitary fittings; and with Cam and Groove fittings for industry

620R continuous tubing pumphead

  • 620R pumphead accommodates 3.2mm wall continuous tubing in four bore sizes from 6.4mm to 15.9mm, giving up to 16 liter/min flow at up to 2bar pressure
  • Tubing is available in eight materials for almost any chemical requirement

620L low pulsation pumphead

  • 620L is a specialist 2bar, six-roller pumphead designed for accurate dispensing to ±0.5%. Minimal pulsation is achieved by splitting the inlet flow into two tubes passing over twin, offset tracks. The two sets of out-of-phase pulses cancel each other out when the channels merge
  • Uses 4.0mm wall Y-elements in a choice of six materials
  • Two single channels are also available
  • Tubing choices: 8mm, 12mm, and 16mm bore, offering flow rates from 0.002 to 12.4 liter/min
  • Dispenses 500ml in 3.5 seconds

Drives

Simple-to use HMI requiring minimal key presses to reduce chances of costly errors. Flow proportional to pump speed over 2,650:1 control range. IP31 wipedown pumps and IP66 cased pumps for washdown environments.

  • 630S - IP31 and 630SN - IP66 are simple, plug-in and switch on pumps offering economy of ownership. Ultimate process security with a 3 level PIN lock.
  • 630U - IP31 and 630UN - IP66 with all the features of the S/SN models, plus configurable inputs and outputs.
  • 630Du - IP31 and 630DuN - IP66 with configurable inputs and outputs, plus RS232 and RS485.
  • 630Bp - IP31 and 630BpN - IP66 with real time communication makes your process secure and flexible. Bus speed 9.6 kbits/s up to 12000 kbits/s connectivity
  • 630En - IP31 and 630EnN - IP66 EtherNet/IP connectivity for fast and easy access to pump data over Industrial Ethernet
  • 630Pn - IP31 and 630PnN - IP66 PROFINET connectivity for fast and easy access to pump data over Industrial Ethernet

Order Information

Product codes

A

B

C

D

Model

Ingress Protection

Pumphead

Plug options

3: S

1: IP31/ NEMA 2

02: 620R3

U: UK mains plug

4: U

N: IP66/ NEMA 4X

E2: 620RE3

E: EU mains plug

5: Du

S: SCADA IP66/ NEMA 4X1,2

E4:620RE43

A: American mains plug

6: Bp

 

5L: 620L

K: Australia mains plug

8: En

5G: 620LG

R: Argentina mains plug

9: Pn

 

C: Swiss mains plug

 

D: India/ South Africa mains plug

B: Brazilian mains plug

 

Notes:

1. U and Du models only

2. Only available with American mains plug

3. Not available for US or DuS models

Recommended Products

  1. Marprene tubing

    Marprene tubing

    Thermoplastic elastomer tubing especially resistant to oxidizing agents. 23 ºF to 176 ºF to 100 psi.

    Tubing - peristaltic

Related Products

  1. 530 process pumps

    530 process pumps

    Flow rates to 55 GPH and pressures up to 100 psi. Precise 2200:1 speed control range.

    Pumps - cased pumps

  2. 730 process pumps

    730 process pumps

    Flow rates to 8.8 GPM and pressures up to 30 psi. Precise 3600:1 speed control range.

    Pumps - cased pumps

Our process pump specialists are here to help you succeed.

To order a product or ask a question

Contact our experts