Pumps - panel mount pumps

Speed control boards

Overview

Speed control boards

The board is designed to provide speed control and remote stop facilities to the 102FD/R and 313FD/D 12 V DC pumps, and is capable of accepting a remote speed control signal input from users' equipment. With the addition of extra components to the standard board, options of direction reverse, power on LED indication, AC supply input, board-mounted speed control potentiometer, and instant prime are available.

Two different boards are available, both in Eurocard format with a 32-way edge connector. The 100 series speed control board for the 102FD/R incorporates an on-board power transistor. The power transistor for the 300 series board is rated for higher loads, and must be mounted on an external heat sink with a 1,000 sq cm surface area.

Full connection and calibration instructions included and optional features requiring additional components are available.

Features and benefits

  • Manual speed control by an external potentiometer (not supplied)
  • Automatic speed control by 0 to 5 V DC control signal
  • Motor stop/start control by remote switch, TTL or CMOS
  • Motor may be connected for clockwise or anticlockwise rotation
  • Instant direction change
  • Power on LED indication
  • Prime maximum speed switch
  • Board-mounted potentiometer for speed control

Technical summary

Speed control ratio20:1 

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Specifications

Technical specifications

400 SCB/424400 SCB/534
Speed control ratio20:1 20:1 
Supply voltage100 V to 115 V AC 50/60 Hz, 220 V to 240 V AC 50/60 Hz 15 V to 30 V DC or 12 V to 22 V AC 50/60 Hz 
Operating temperature range -30 °C to 40 °C-30 °C to 40 °C

400 SCB/424 dimensions

Assembled behind mounting panel with FDC and FDP drives
Length Height Width
FDC 5W motor with Ø40mm gearbox - 2 x 1.5 40*
FDC/FDP 5W motor with Ø68mm gearbox 30 15 -
FDC/FDP 30W motor with Ø68mm gearbox - 30 -

400 SCB/534 dimensions

Assembled behind mounting panel with FDC and FDP drives
Length Height Width
FDC 5W motor with Ø40mm gearbox - 2 x 1.5 40*
FDC/FDP 5W motor with Ø68mm gearbox 30 15 -
FDC/FDP 30W motor with Ø68mm gearbox - 30 -

Literature

Datasheet

  1. 400SCB534 datasheet (EN).pdf
    PDF - 1.1mb
  2. 400SCB424 datasheet (EN).pdf
    PDF - 92.5kb

Order Information

Product codes

400 SCB/424 product codes

Supply voltage 0-12VDC, 5W motor 0-21VDC, 30W motor
100-115VAC 50/60Hz 049.C424.05A 049.C424.30A
220-240VAC 50/60Hz 049.C424.05E 049.C424.30E

400 SCB/534 product codes

Supply voltage Output voltage Motor Product code
15-30VDC or 12-22VAC 50/60 Hz 0-12VDC or 0-24VDC 5W, 12V/30W, 24V 049.C534.000

Related Products

  1. 100 series low-flow pumps

    100 series low-flow pumps

    Iconic flip-top pumps for flows up to 500 ml/min. Accurate flow performance to medium pressures.

    Pumps - panel mount pumps

  2. 300 series medium-flow pumps

    300 series medium-flow pumps

    Iconic flip-top pumps for flows to 2,000 ml/min. Suitable for wide range of flow rate and filling applications.

    Pumps - panel mount pumps

  3. 400/M series compact pumps

    400/M series compact pumps

    One to eight channel pumps for medium flows to 200 ml/min. Compact design and Luer connectors for 'fit and forget' applications.

    Pumps - panel mount pumps

  4. 500 series high-flow pumps

    500 series high-flow pumps

    Durable, single channel pumps for high flows to 3,500 ml/min. Supports continuous tubing and Loadsure elements for high pressures.

    Pumps - panel mount pumps

Our specialists are here to help you succeed.

To order a product or ask a question

Contact our experts