Tubing - peristaltic

PureWeld XL TPE Tubing

Overview

PureWeld® XL - high performance TPE tubing

Designed for secure, cost effective peristaltic pumping and transfer duties, PureWeld XL tubing provides exceptional life and accurate flow rates compared to other TPE tubing. PureWeld XL provides excellent chemical resistance making it suitable for a range of bioprocessing fluids. PureWeld XL can be welded, allowing complete fluid paths to be assembled in minutes. The tubes’ ultra-smooth bore and wall are ideal for ultrasonic flow measurement, and is engineered to reduce spallation.

Chemical Compatibility Guide

Features and benefits

  • Reduces inventory and minimises fluid contact materials
  • Full compendial data to USP <788> for sub-visible particulates
  • EP 2.6.14, USP<85> for bacterial endotoxins
  • Suitable for sterilisation by Gamma irradiation
  • Animal-derived content free (ADCF)

Technical summary

SpallationVery low 
Certification and complianceEC 1935/2004, FDA 21CFR177.1810, USP <661>, USP <788>, USP <85>, USP Class VI 
Gamma stability25 kGy to 50 kGy 

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Performance

Pumping life performance

Specifications

Technical specifications

PureWeld XL weldable TPE tubingPureWeld XL TPE tubing Elements
Bore size0.5 - 25.4 mm6.4 - 17 mm
Bore size0.02 - 1 in0.25 - 0.6692 in
Wall thickness1.6 - 4.8 mm2.4 - 4 mm
Wall thickness0.0625 - 0.1875 in0.09375 - 0.15625 in
Length15 - 152 m
ColourColourless Colourless 
TransparencyOpaque Opaque 
SpallationVery low Very low 
Certification and complianceEC 1935/2004, FDA 21CFR177.1810, USP <661>, USP <788>, USP <85>, USP Class VI EC 1935/2004, FDA 21CFR177.1810, USP <661>, USP <788>, USP <85>, USP Class VI 
Operating temperature range -20 °C to 80 °C-20 °C to 80 °C
Operating temperature range -4 °F to 176 °F-4 °F to 176 °F
Hardness, shore A (5sec)65-73 65-73 
Specific gravity0.89-0.91 g/cm³0.89-0.91 g/cm³
UV resistance Good Good 
Tear B>30 kN/m>30 kN/m
Tear B>171 ppi>171 ppi
Ultimate tensile strength63-180 bar63-180 bar
Ultimate tensile strength116 - 261 psi116 - 261 psi
Ultimate tensile strength8 - 18 MPa8 - 18 MPa
Elongation at break>450 %>450 %
Tensile stress at 100% elongation2.4-3.5 Mpa2.4-3.5 Mpa
Tensile stress at 100% elongation348 - 507 Psi348 - 507 Psi
Gas permeability ratingLow Low 
Compression set<80 %<80 %
Water absorptionLow Low 
Gamma stability25 kGy to 50 kGy 25 kGy to 50 kGy 
Sterilisation methodsGamma Gamma 
ISO Hardness: ISO 868; Specific gravity: ISO2781; Tear B, Ultimate tensile strength, Elongation at break, Tensile stress at 100 % elongation; ISO37-2005. Values reported above are not intended for sales specification and some of the properties are not routinely measured.

Materials of construction

TubingSEBS
Connector materialPVDF

Validation

About the PureWeld XL tubing validation guides

PureWeld XL and its raw materials have been tested under a range of pharmacopoeial and non pharmacopoeial standards. These include:

  • USP Biocompatibility in vivo and in vitro
  • European Pharmacopoeia, 3.1.9
  • ISO 10993
  • EC 1935/2004

Additional testing carried out includes extractables testing. For a summary of the validation/qualification testing that has been carried out on PureWeld XL, please see the summary guide.

The full validation guide including additional information regarding test methods and actual test reports.

PureWeld XL, its raw materials and manufacturing process meets a number of regulatory compliance legislations. Specific statements relating to these compliances can be found in the Pumpsil compliance guide which can be requested below.

PureWeld XLadditionally complies with the legal regulations laid down in the Regulation (EC) No. 1935/2004.

PureWeld XL declaration of compliance

Certificate of conformance

Download summary guide

PureWeld XL TPE Tubing validation summary guide

Validation summary guide PDF - 367,4kb

Request full validation guide

Disclaimer: You hereby agree the provided validation guide is for private use only to assist in the qualification of the products listed within the validation guide.

You also agree that you will not copy, redistribute, transmit, assign, sell, broadcast, rent, share, lend, modify, adapt, edit or transfer the validation guide to any other party without prior consent from WMFTS.

Disclaimer: You hereby agree the provided validation guide is for private use only to assist in the qualification of the products listed within the validation guide.

You also agree that you will not copy, redistribute, transmit, assign, sell, broadcast, rent, share, lend, modify, adapt, edit or transfer the validation guide to any other party without prior consent from WMFTS.

Literature

Datasheet

  1. PureWeld XL datasheet (US).pdf
    PDF - 454,3kb
  2. PureWeld XL Elements datasheet (US).pdf
    PDF - 439,2kb

Other Resources

  1. PureWeld declaration of compliance (EN).pdf
    PDF - 207,4kb

Production and packaging

Production

Watson-Marlow PureWeld XL tubing is a high purity product which is produced in a state-of-the-art ISO14644-1 Class 7 facility. PureWeld XL is a thermoplastic elastomer tube which is produced from synthetic components. PureWeld XL does not include any natural rubber products such as latex and is animal derived content free. There are no known carcinogens used in the tubing or in the production of the tubing. The raw material has been fully tested to USP Class VI and FDA CFR177.1810.

Watson-Marlow PureWeld XL tubing is manufactured from virgin pellet only, no regrind is used in the production. The raw material is manufactured under strict controls of ingredients, operating procedure and packaging. Each lot of raw material undergoes mechanical testing to ensure compliance with the material specification. Full traceability is assured through the lot number of the tubing, this enables the raw material, manufacturing equipment, quality control records and production records to be identified.

Packaging

PureWeld XL tubing is double-packed in heat-sealed polythene bags in the ISO14644-1 Class 7 clean room. The bags are labelled with the PureWeld XL part number, lot number, use-by date and tube description. The standard coil length is 15 m/50', other coil lengths or cut lengths are available on request.

Tubing reels, which include up to 500'/152 m of tubing, are also available for 1.6 mm, 2.4 mm and 3.2 mm wall tubing.

The bagged PureWeld XL coils and reels are packed in a card box outside the clean room. The card boxes are, like the polythene bags, labelled with the PureWeld XL part number, lot number, use-by date and tube description. A lot-specific certificate of conformance is included with each pack of tubing.

Full lot traceability is maintained for every batch of tubing produced through detailed raw material and production records, hard copy and electronic production data and retain samples.

Traceability

All tubing packaging is labelled with the product description, part and lot numbers, use-by date and a barcode of this information. Included in the box is the certificate of conformance. As part of the Watson-Marlow ISO9001:2008 system, lot records and process data are stored for all tubing produced in the plant.

Full lot traceability to raw material supply is therefore assured. All records are kept for the shelf life of the tubing. The plastic packaging used in direct contact with the tubing is also lot traceable and, as with the tubing, all lot records are kept for the shelf life of the tubing.

A sample of every production batch of PureWeld XL tubing is retained for reference.

Download a copy of your certificate of conformance for Watson-Marlow tubing and sanitary tubing elements.

Order Information

Product codes

PureWeld XL weldable TPE tubing product codes

PureWeld XL peristaltic pump tubing sizes available
Bore Wall Part number
mm inch mm inch
0.5 1/50 1.6 1/16 942.0005.016
1.6 1/16 1.6 1/16 942.0016.016
1.6 1/16 2.4 3/32 942.0016.024
2.4 3/32 1.6 1/16 942.0024.016
3.2 1/8 1.6 1/16 942.0032.016
4.8 3/16 1.6 1/16 942.0048.016
4.8 3/16 2.4 3/32 942.0048.024
6.4 1/4 1.6 1/16 942.0064.016
6.4 1/4 2.4 3/32 942.0064.024
8.0 5/16 1.6 1/16 942.0080.016
8.0 5/16 2.4 3/32 942.0080.024
9.6 3/8 2.4 3/32 942.0096.024
9.6 3/8 3.2 1/8 942.0096.032
9.6 3/8 4.8 3/16 942.0096.048
12.0 15/32 4.0 5/32 942.0120.040
12.7 1/2 3.2 1/8 942.0127.032
12.7 1/2 4.8 3/16 942.0127.048
15.9 5/8 3.2 1/8 942.0159.032
15.9 5/8 4.8 3/16 942.0159.048
19.0 3/4 4.8 3/16 942.0190.048
25.4 1 4.8 3/16 942.0254.048

All sizes of PureWeld XL tubing are available in 50ft (15m) coils. Custom sizes are available to order, as are other specific requirements.

PureWeld XL TPE tubing Elements product codes

PureWeld XL Double Segment Kynar Y-Elements
Bore Wall Thickness Product codes
mm inch mm inch
6.4 0.2500 2.4 0.0938 942.E064.K24
8.0 0.3125 2.4 0.0938 942.E080.K24
9.6 0.3750 2.4 0.0938 942.E096.K24
12.0 0.4724 4.0 0.1562 942.E120.K40
PureWeld XL LoadSure Elements ordering codes
Product Name Product codes
PureWeld XL LoadSure 6.4mm Bore Tri-Clamp Element 942.0064.PFT
PureWeld XL LoadSure 9.6mm Bore Tri-Clamp Element 942.0096.PFT
PureWeld XL LoadSure 12.0mm Bore Tri-Clamp Element 942.0120.PFT
PureWeld XL LoadSure 17.0mm Bore Tri-Clamp Element 942.0170.PFT

Recommended Products

  1. 530 process pumps

    530 process pumps

    Flow rates to 3.5 L/min (55 USGPH) and pressures up to 7 bar (100 psi). Precise 2,200:1 speed control range.

    Pumps - cased pumps

  2. 630 process pumps

    630 process pumps

    Flow rates to 18 L/min (4.76 USGPM) and pressures up to 4 bar (60 psi). Precise 2,650:1 speed control range.

    Pumps - cased pumps

  3. 730 process pumps

    730 process pumps

    Flow rates to 33 L/min (8.8 USGPM) and pressures up to 2 bar (30 psi). Precise 3,600:1 speed control range.

    Pumps - cased pumps

Related Products

  1. Bioprene: Thermoplastic tubing

    Bioprene: Thermoplastic tubing

    Thermoplastic tubing with long peristaltic life and low permeability. 5 ºC to 80 ºC (23 ºF to 176 ºF).

    Tubing - peristaltic

  2. GORE® STA-PURE Series PCS tubing

    GORE® STA-PURE Series PCS tubing

    Reinforced silicone tubing ideal for biopharmaceutical applications. -20 ºC to 80 ºC (-4 ºF to 176 ºF) to 7 bar (100 psi).

    Tubing - peristaltic

  3. GORE STA-PURE PFL tubing

    GORE STA-PURE PFL tubing

    Reinforced fluroelastomer tubing with extreme chemical resistance. -20 ºC to 80 ºC (-4 ºF to 176 ºF) to 4 bar (60 psi).

    Tubing - peristaltic

  4. LoadSure elements

    LoadSure elements

    LoadSure elements allow pump tubing to be changed in under one minute, to achieve perfect tube alignment and tension.

    Tubing - peristaltic

  5. Pumpsil tubing

    Pumpsil tubing

    Platinum-cured silicone tubing with ultra smooth bore and excellent flow stability. -20 ºC to 80 ºC (-4 ºF to 176 ºF).

    Tubing - peristaltic

Our tubing specialists are here to help you succeed.

To order a product or ask a question

Contact our experts