Pumps - hose pumps

Bredel CIP Hose Pumps 40-50

Arrange a demo

Overview

Bredel CIP hose pumps 40-50

The Bredel CIP 40 and CIP 50 pumps are designed for food manufacture and other processes that require regular clean in place, with all the advantages of low shear, hygienic pumping. Recommended for sanitary processes, or other applications requiring regular cleaning of the process lines.

Chemical Compatibility Guide

Features and benefits

3A and FDA certified
Food approved NBR pump hose, with NSF® registered food grade lubricant
Stainless steel sanitary connectors range includes DIN, ASA or JIS
Shoes on the rotor retract automatically for cleaning of pump element inside
Cam actuated electrically, pneumatically or manually
Maximum sterilization temperature 120 ºC
Bredel CIP 40 flow rates up to 4,800 L/h, pressures up to 232 psi
Bredel CIP 50 flow rates up to 8,500 L/h, pressures up to 232 psi

Technical summary

Max. flow rate continuous	8760 L/h
Max. flow rate continuous	2311 USGPH
Volume per revolution	1.33 - 2.92 L
Max. continuous operating speed	50 - 60 rpm
Max. operating pressure	16 bar
Max. operating pressure	232 psi
Min. starting torque	320 - 620 N m
Min. starting torque	2832 - 5,487 in.lbs
Weight	175 - 265 kg

Technical Summary table lists features available within the range. See ‘Technical specifications’ tab for model specific information.

Performance

CIP 40 performance

CIP 50 performance

Specifications

Technical specifications

	CIP 40	CIP 50
Max. flow rate continuous	1263 USGPH (4788 L/h)	2311 USGPH (8760 L/h)
Max. flow rate intermittent	1263 USGPH (4788 L/h)	2311 USGPH (8760 L/h)
Volume per revolution	0.35 USG (1.33 L)	0.77 USG (2.92 L)
Max. continuous operating speed	60 rpm	50 rpm
Max. intermittent operating speed	60 rpm	50 rpm
Max. operating pressure	232 psi (16 bar)	232 psi (16 bar)
Max. suction capability	374 inWC (9.5 mWC)	374 inWC (9.5 mWC)
Suction capability (80% Flow rate)	354 inWC (9 mWC)	315 inWC (8 mWC)
Operating temperature	-4 °F to 113 °F (-20 °C to 45 °C)	-4 °F to 113 °F (-20 °C to 45 °C)
Fluid temperature ranges	-4 °F to 176 °F (-20 °C to 80 °C)	-4 °F to 176 °F (-20 °C to 80 °C)
Min. starting torque	2832 in.lbs (320 N m)	5487 in.lbs (620 N m)
Weight	386 lbs (175 kg)	584 lbs (265 kg)
Pumphead weight	306 lbs (139 kg)	430 lbs (195 kg)
Hose lubricant required	2.6 USG (10 L)	5.3 USG (20 L)
Port configurations	Down, Left, Right, Up	Down, Left, Right, Up
Compatible hose materials	CSM, EPDM, F-NBR, NBR, NBR for food, NR-Metering, NR-Transfer	CSM, EPDM, F-NBR, NBR, NBR for food, NR-Metering, NR-Transfer
Flange assembly type	ANSI, DIN, JIS	ANSI, DIN, JIS
Sanitary connector options	DIN 11851, DIN 11864, IDF, RJT, SMS, Tri-clamp	DIN 11851, DIN 11864, IDF, RJT, SMS, Tri-clamp

Please consult your Bredel representative for lower or higher temperature operation. Allowable ambient temperature is based on pump capabilities and may be further limited by gearbox ambient capabilities.

CIP 40 dimensions

Type	A	B	C	C	D	Ød	E	F	G	H	H1	Jmax	K	L	L1	L2	M	N	O	Q	R
Bredel CIP 40 (mm)	702	412	2.5	10	430	40	110	454	508	615	325	414	64	*	260	80	25	700	25	18	110
Bredel CIP 40 (inches)	27.6	16.2	0.1	0.4	16.9	1.57	4.3	17.9	20.0	24.2	12.8	16.3	2.5	*	10.2	3.1	1.0	27.6	1.0	0.7	4.3

CIP 50 dimensions

Type	A	B	C	C	D	Ød	E	F	G	H	H1	Jmax	K	L	L1	L2	M	N	O	Q	R
Bredel CIP 50 (mm)	835	475	3	10	554	50	123	444	496	760	400	433	78	*	325	100	25	870	25	18	125
Bredel CIP 50 (inches)	32.9	18.7	0.1	0.4	21.8	1.97	4.8	17.5	19.5	29.9	15.7	17.0	3.1	*	12.8	3.6	1.0	34.3	1.0	0.7	4.9

Materials of construction

Hose material	CSM, EPDM, F-NBR, NBR, NBR for food, NR Endurance, NR-Transfer
Housing	Cast iron
Rotor assembly	Cast iron
Cover assembly	Cast iron
Brackets and fasteners	Galvanized steel, Stainless steel 316
Support frame	Galvanized steel, Stainless steel 316
Hose clamps	Galvanized steel, Stainless steel 316
Seals	NBR