Valves - diaphragms

Silicone and Silicone Plus diaphragms

Order a sample
Order a sample

Overview

Silicone and Silicone Plus diaphragms

Medical grade platinum-cured silicone diaphragms meet USP Class VI and FDA 21 CFR 177.2600 standards.

We provide two different finishes to our silicone diaphragms, white which is made with Q7-4765 and 0.25 % titanium dioxide or clear with no titanium dioxide.

We also offer a Parylene surface treated version doubling the longevity of the diaphragm.

Features and benefits

  • All our diaphragms are laser-etched with cure dates and batch numbers, ensuring that they are completely traceable
  • Medical grade silicone available in white or clear finish
  • Widely used in pharmaceutical applications
  • Parylene surface treated version also available

Technical summary

Diaphragm variant(s)Bellows, Straight 
Compatible actuatorsAJS, AKS 
Material specificationMedical grade (platinum cured), Silicone with Parylene surface treatment 
StandardsASME BPE, RoHS 

Technical Summary table lists features available within the range. See ‘Technical specifications’ tab for model specific information.

Share

Specifications

Technical specifications

Silicone diaphragmsSilicone Plus diaphragms
ColourWhite White 
Diaphragm variant(s)Bellows, Straight Bellows, Straight 
Parylene treatmentYes Yes 
Operating temperature range -51 to 135 °C-51 to 135 °C
Operating temperature range -60 to 275 °F-60 to 275 °F
Compatible actuatorsAJS, AKS AJS, AKS 
100 200 
1000 2000 
Shelf life5 years
Material specificationMedical grade (platinum cured) Silicone with Parylene surface treatment 
StandardsASME BPE, RoHS ASME BPE, RoHS 
CertificationADCF, BSE/TSE free, FDA 21CFR177.2600, USP <87> ADCF, BSE/TSE free, FDA 21CFR177.2600, USP <87> 

Materials of construction

DuPont Q7-4765, Nusil MED-4065
Inserts304 SS

Literature

Brochures

  1. ASEPCO weirless radial diaphragm valves (EN).pdf
    PDF - 600.3kb

Datasheet

  1. ASEPCO diaphragms datasheet (EN).pdf
    PDF - 234.5kb

Recommended Products

  1. Tank-bottom valves

    Tank-bottom valves

    The leading aseptic tank-bottom valve. Available in multiple configurations including custom-machined.

    Valves - tank valves

  2. Inline valves

    Inline valves

    Our best-selling in-line valve featuring a 180 degree install angle with superior drainability in multiple orientations.

    Valves - inline valves

  3. Sample valves

    Sample valves

    Consistent sampling every time. Behind-the-seat-flow path allows for easy clean-in-place/steam-in-place between samples.

    Valves - sampling

  4. Divert valves

    Divert valves

    Designed to allow division and blending of two or three fluid paths in a single assembly. Eliminates dead legs.

    Valves - tank valves

  5. Insulate valves

    Insulate valves

    Use with freeze tanks or tanks requiring critical temperature control. Extended body and diaphragm.

    Valves - tank valves

  6. Point-of-use valves

    Point-of-use valves

    Created for low-point draining or sampling in piping systems, this valve eliminates dead legs and helps promote drainage.

    Valves - tank valves

  7. Process valves

    Process valves

    A valve with a simple clamp connection for easy installation. Allows steam-in-place or flush through, without dead legs.

    Valves - tank valves

  8. Retrofit valves

    Retrofit valves

    Used to add ASEPCO valves to existing tanks. Many different designs to fit your specific situation.

    Valves - tank valves

  9. Sterillite valves

    Sterillite valves

    An integrated steam valve added to our tank-bottom valve. Allows steam-in-place or flush through, without dead legs.

    Valves - tank valves

  10. Tangential valves

    Tangential valves

    Off-center outlet for full drainability when installed on the slope of a vessel head.

    Valves - tank valves

  11. Sterile access valves

    Sterile access valves

    Minimize hold-up volume, with two flow paths in one efficient valve.

    Valves - inline valves

  12. I-Sample valves

    I-Sample valves

    Designed with through-the-chamber CIP/SIP via 1/4- to 1/2-inch ports, ensuring a truly representative sample every time.

    Valves - sampling

Related Products

  1. EPDM and EPDM plus diaphragms

    EPDM and EPDM plus diaphragms

    EPDM diaphragms. Not suitable for use with solvents or petroleum agents. Parylene surface treated version available.

    Valves - diaphragms

  2. PTFE diaphragms

    PTFE diaphragms

    Long-lasting, quick-change diaphragms. Extremely chemical and steam resistant. Only available for tank valves.

    Valves - diaphragms

  3. Viton diaphragms

    Viton diaphragms

    Excellent heat and chemical resistance. Not suitable for use with ketones and esters. Steam resistant version available.

    Valves - diaphragms

Our specialists are here to help you succeed.

To order a product or ask a question

Contact our experts