FMB210
Fully-automatic systems for production. Highly accurate filling of volumes from less than 0.2 ml to more than 250 ml.
Aseptic filling - fully automatic systems
Call +65 6455 7411
Fluid path accessories for Flexicon products include: a range of filling nozzles, tubing connectors (Y-connectors in PVDF or PP), weights for tubing, tube manifolds, filling stands and a range of format parts for table-top capping machines (including bottle tools for a wide range of diameters, capping heads for crimp capping and capping tools for screw caps).
Certification and compliance | BSE/TSE free, FDA 21CFR177.1595, FDA 21CFR177.2415, FDA 21CFR177.2510, USP Class IV, USP Class VI |
Gamma stability | Sterilisable by gamma irradiation |
Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.
2 Tube manifold | 4 Tube manifold | Filling nozzle - disposable PEI 100 | Filling nozzle - gas purging | Filling nozzle - hand-held | Filling nozzle - stainless steel AISI316L | Filling nozzle - sterilisable by gamma irradiation or autoclaving | Filling nozzle - with non-drip valve | Filling nozzle - with pneumatic valve | Filling stand | Manifold assembly | Weight for tubing | Y-connectors polyproplyene | Y-connectors PVDF/kynar | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Sizes | 0.6 mm to 6.0 mm ID | 0.6 mm to 6.0 mm ID | 0.8 mm to 6.0 mm ID | 1.3 mm to 5.1 mm ID | 0.6 mm to 8.0 mm ID | 0.6 mm to 8.0 mm ID | 5.0 mm to 12.0 mm ID | H380 mm | 1" to 1.5" bore | 1.6 mm to 8.0 mm ID | 1.2 mm to 10.2 mm ID | 1.2 mm to 4.8 mm ID | ||
Certification and compliance | FDA 21CFR177.1595, USP Class VI | BSE/TSE free, FDA 21CFR177.2415, USP Class VI | BSE/TSE free, FDA 21CFR177.2510, USP Class IV | |||||||||||
Gamma stability | Sterilisable by gamma irradiation |
Tube connector for 2 tubes -Part number | A (OD) (mm) | B (ID) (mm) |
---|---|---|
84-081-106 | 0.6 | 1.0 |
84-081-110 | 1.0 | 1.5 |
84-081-116 | 1.6 | 2.1 |
84-081-132 | 3.2 | 3.8 |
84-081-145 | 4.5 | 5.5 |
84-081-160 | 6.0 | 7.0 |
Tube connector for 4 tubes - Part number | A (OD) (mm) | B (ID) (mm) |
---|---|---|
84-082-106 | 0.6 | 1.0 |
84-082-110 | 1.0 | 1.5 |
84-082-116 | 1.6 | 2.1 |
84-082-132 | 3.2 | 3.8 |
84-082-145 | 4.5 | 5.5 |
84-082-160 | 6.0 | 7.0 |
SPECIFICATIONS | ||||
---|---|---|---|---|
Materials | PEI 1000 (Polyetherimide) | |||
A (ID) | B (OD) | Fill volumes from | Part number | |
Dimensions in mm | Ø0,8 | Ø2,2 | 0.5 ml | 30-033-008 |
Ø1,2 | Ø2,6 | 1.0 ml | 30-033-012 | |
Ø1,6 | Ø3,0 | 1.7 ml | 30-033-016 | |
Ø3,2 | Ø4,6 | 6.5 ml | 30-033-032 | |
Ø4,8 | Ø6,5 | 12.0 ml | 30-033-048 | |
Ø6,0 | Ø8,0 | 22.0 ml | 30-033-060 | |
Set of all sizes | 30-700-053 | |||
Compliance | FDA 21 CFR § 177.1595 USP Class VI | |||
Declaration of compliance - type 2.1 acc.: DS/EN 10204 | Included |
SPECIFICATIONS | |||
---|---|---|---|
Materials | AISI 316L + Viton | ||
C (ID) | D (OD) | Part number | |
Dimensions in mm | Ø4,5 | Ø5,3 | 30-031-050 |
Ø8,5 | Ø10,1 | 30-031-090 | |
O-ring for gas filling nozzle | 54-020-116 | ||
Nozzle holder incl. arm for filling stand | 30-700-053 | ||
Declaration of compliance - Type 2.1 acc.: DS/EN 10204 | Included |
Part number | Description |
---|---|
81-100-200 | Filling stand Ø12 x H380 mm for filling nozzles 30-030-xxx |
81-200-050 | Filling stand Ø20 x H500 mm for filling heads 30-200-xxx |
81-200-000 | Filling stand Ø20 x H750 mm for filling heads 30-200-xxx |
30-700-053 | Nozzle holder arm for filling nozzles 30-030-xxx, 30-033-xxx and 30-040-xxx. Can be mounted on all filling stands. (Included in 81-100-200) |
30-710-052 | Nozzle holder arm for filling heads 30-200-xxx. Can be mounted on all filling stands. (Included in 81-200-050 and 81-200-000) |
SPECIFICATIONS | ||||
---|---|---|---|---|
Materials | AISI 316L | |||
A (ID) | B (OD) | Fill volumes from | Part number | |
Dimensions in mm | Ø1,3 | Ø2,3 | 1.0 ml | 30-015-020 |
Ø3,1 | Ø4,0 | 6.5 ml | 30-015-040 | |
Ø4,1 | Ø5,0 | 12.0 ml | 30-015-050 | |
Ø5,1 | Ø8,5 & 6,0 | 22.0 ml | 30-015-060 | |
Declaration of compliance - Type 2.1 acc.: DS/EN 10204 | Included |
SPECIFICATIONS | ||||
---|---|---|---|---|
Materials | AISI 316L | |||
A (ID) | B (OD) | Fill volumes from | Part number | |
Dimensions in mm | Ø0,6 | Ø1,0 | 0.1 ml | 30-030-006 |
Ø1,0 | Ø1,5 | 0.5 ml | 30-030-010 | |
Ø1,6 | Ø2,1 | 1.7 ml | 30-030-016 | |
Ø3,2 | Ø3,8 | 6.5 ml | 30-030-032 | |
Ø4,5 | Ø5,5 | 12.0 ml | 30-030-045 | |
Ø6,0 | Ø7,0 | 22.0 ml | 30-030-060 | |
Ø8,0 | Ø9,0 | 35.0 ml | 30-030-080 | |
Set of all sizes | 82-100-010 | |||
Nozzle holder incl. arm for filling stand | 30-700-053 | |||
Declaration of compliance - Type 2.1 acc.: DS/EN 10204 | Included |
SPECIFICATIONS | ||||
---|---|---|---|---|
Materials | AISI 316L and PEEK | |||
A (ID) | B (OD) | Fill volumes from | Part number | |
Dimensions in mm | Ø0,6 | Ø1,0 | 0.1 ml | 30-040-006 |
Ø1,0 | Ø1,5 | 0.5 ml | 30-040-010 | |
Ø1,6 | Ø2,1 | 1.7 ml | 30-040-016 | |
Ø3,2 | Ø3,8 | 6.5 ml | 30-040-032 | |
Ø4,5 | Ø5,5 | 12.0 ml | 30-040-045 | |
Ø6,0 | Ø7,0 | 22.0 ml | 30-040-060 | |
Ø8,0 | Ø9,0 | 35.0 ml | 30-040-080 | |
Nozzle holder incl. arm for filling stand | 30-700-053 | |||
Compliance | FDA USP, class VIFDA 21 CFR Part 177.2415, 2008BSE/TSE free | |||
Quality certificate | Included |
SPECIFICATIONS | ||||
---|---|---|---|---|
Materials | AISI 316 | |||
A (ID) | B (OD) | Fill volumes from | Part number | |
Dimensions in mm | Ø8,5 | Ø6,0 | 25.0 ml | 30-200-085 |
Ø12,0 | Ø8,0 | 100.0 ml | 30-200-120 | |
Ø15,0 | Ø10,0 | 150.0 ml | 30-200-150 |
Position | Part number |
---|---|
1.2 - Nitrile rubber valve plate | 30-200-086 |
1.2 A - PTFE (Teflon) valve plate | 30-200-084 |
1.3 - PTFE (Teflon) valve insert | 30-200-082 |
1.4 - Nut | 30-200-010 |
SPECIFICATIONS | |||||
---|---|---|---|---|---|
Materials | AISI 316 | ||||
A | B (OD) | C (ID) | Fill volumes from | Part number | |
Dimensions in mm | 75 | Ø8,0 | Ø5,0 | 25.0 ml | 30-210-050 |
75 | Ø10,0 | Ø7,0 | 50.0 ml | 30-210-070 | |
75 | Ø12,0 | Ø9,0 | 150.0 ml | 30-210-090 | |
35 | Ø15,0 | Ø10,0 | 150.0 ml | 30-210-091 | |
75 | Ø16,0 | Ø12,0 | 300.0 ml | 32-210-120 | |
With net at tip of nozzle prevents dripping when filling oil | 75 | Ø12,0 | Ø8,0 | 100.0 ml | 32-215-080 |
75 | Ø16,0 | Ø11,0 | 300.0 ml | 32-215-110 |
A = NOZZLE BODY | |||
---|---|---|---|
To be used with | Part number | ||
A | Incl. pneumatic control box | PD12, PD22, GD30 | 82-510-000 |
A1 | Excl. pneumatic control box | PF22, DF32, GF30 | 30-100-000 |
B = TUBE CONNECTOR | |||
---|---|---|---|
ID | OD | Part number | |
Dimensions in mm | 7 | 10 | 30-100-105 |
10 | 13 | 30-100-110 |
C = FILLING NOZZLE WITH OUTSIDE VALVE | ||||
---|---|---|---|---|
ID | OD | Length of nozzle | Part number | |
Dimensions in mm | 8 | 10 | 110/60 | 30-100-250 |
12 | 14 | 110/60 | 30-100-260 | |
8 | 10 | 300/250 | 30-100-270 | |
12 | 14 | 300/250 | 30-100-280 |
D = FILLING NOZZLE WITH INSIDE VALVE | ||||
---|---|---|---|---|
Dimensions in mm | ID | OD | Length of nozzle | Part number |
6 | 14 | 110/63 | 30-100-208 | |
7,5 | 14 | 110/53 | 30-100-210 |
SPARE PARTS FOR A / A1 | ||
---|---|---|
Pos. | Description | Part number |
1 | Nozzle body | 30-100-005 |
2 | Arm | 30-700-050 |
3 | House for gasket | 30-100-012 |
4 | Gasket | 54-190-060 |
5 | Head for cylinder | 30-100-010 |
6 | Spring | 30-100-015 |
7 | Spring top | 30-100-020 |
8+9 | Pneumatic cylinder | 30-100-050 |
10 | Gasket | 30-100-053 |
11 | Gasket | 30-100-051 |
Clamp gasket - Part number | Description | ID (mm) |
---|---|---|
84-085-220 | 1” bore, nitrile | 25.4 |
84-085-222 | 1½” bore, nitrile | 38.1 |
84-085-230 | 1” bore, silicone | 25.4 |
84-085-232 | 1½” bore, silicone | 38.1 |
Weight for tubing – Part number | A (ID) (mm) | B (OD) (mm) |
---|---|---|
30-032-016 | 1.6 | 2.1 |
30-032-032 | 3.2 | 3.8 |
30-032-045 | 4.5 | 5.5 |
30-032-060 | 6.0 | 7.0 |
30-032-080 | 8.0 | 9.0 |
Y-connector with certificate - part number | A (OD) (mm) | B (ID) (mm) | For ID tube (mm) |
---|---|---|---|
84-011-002 | 2.4 | 1.2 | 0.5-0.8 |
84-011-004 | 3.6 | 1.8 | 1.2-1.6 |
84-011-006 | 5.9 | 3.0 | 3.0-3.2 |
84-011-008 | 7.2 | 3.6 | 3.2-4.8 |
84-011-010 | 9.5 | 4.8 | 4.8-6.5 |
84-011-012 | 12.4 | 7.5 | 8.0-10.0 |
84-011-014 | 15.9 | 10.2 | 10.0-12.5 |
Part number | A (OD) (mm) | B (ID) (mm) | For ID tube (mm) |
---|---|---|---|
84-012-002 | 2.4 | 1.2 | 0.5-0.8 |
84-012-004 | 3.6 | 1.8 | 1.2-1.6 |
84-012-006 | 5.9 | 3 | 3.0-3.2 |
84-012-008 | 7.2 | 3.6 | 3.2-4.8 |
84-012-010 | 9.5 | 4.8 | 4.8-6.5 |
Material | Kynar®, Nitrile, Nitrile rubber, PEEK, PEI 1000 (Polyetherimide), Polypropylene, PTFE, PVDF, Silicone, Stainless steel AISI 316L |
PEI 100 nozzles are manufactured in within a facility operating an ISO 9001 quality management system.
Developed for the biotechnology and pharmaceutical industry, PEI 100 nozzles are suitable for sterilisation by gamma irradiation.
PEI 100 nozzle validation summary guide
Validation summary guide PDF - 630.5kbFully-automatic systems for production. Highly accurate filling of volumes from less than 0.2 ml to more than 250 ml.
Aseptic filling - fully automatic systems
High quality screw capping for bottles or vials. Reduce risk of repetitive strain injuries. Adjustable torque.
Aseptic filling - capping machines
High quality crimp capping for bottles or vials. Prevent repetitive strain injuries. Fast changeover.
Aseptic filling - capping machines
To order a product or ask a question