Hose pump elements

Bredel Bioprene hose

Overview

Bioprene hose elements

The hose element is critical to ensure pump performance, durability and efficiency. Bredel composite reinforced hoses are constructed from high-quality compounded rubbers reinforced with four individual layers of braided nylon, and finished by high-precision machining. Inner and outer layers are extruded and, after construction, machined to ensure critical tolerances are maintained. Meets FDA standards, resistant to alcohols, acids and oxidising products.

Perfect 100 % compression eliminates slippage which can destroy shear sensitive product and reduce metering accuracy.

Chemical Compatibility Guide

Features and benefits

  • Tight tolerances for low stress on bearings
  • Perfect compression for long life
  • Excellent suction performance – 9 m (30 ft) suction lift
  • High pressure capability 3.5 bar (51 psi)
  • Repeatable volumetric accuracy to ± 1 %
  • Consistent capacity independent of varying suction and discharge conditions
  • Exceptional performance when handling high viscosity product
  • Max. fluid temperature: 80 ºC (176 ºF), Min. fluid temperature: 5 ºC (41 ºF)

Technical summary

Max. operating pressure3.5 bar
Max. operating pressure51 psi
Bore size40 - 50 mm
Bore size1.57 - 1.97 in
Wall thickness13 - 14 mm
Wall thickness0.512 - 0.551 in

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Specifications

Technical specifications

40 mm50 mm
Max. operating pressure3.5 bar3.5 bar
Max. operating pressure51 psi51 psi
Operating temperature range 5 °C to 45 °C5 °C to 45 °C
Operating temperature range 41 °F to 113 °F41 °F to 113 °F
Fluid temperature range 5 °C to 80 °C5 °C to 80 °C
Fluid temperature range 41 °F to 176 °F41 °F to 176 °F
Bore size40 mm50 mm
Bore size1.57 in1.97 in
Wall thickness14 mm13 mm
Wall thickness0.551 in0.512 in
Length1820 mm1490 mm
Length71.7 in58.7 in
Your local Bredel sales office/distributor can advise the right hose for your application. For best pump performance use Bredel Genuine Hose Lubricant (NSF Non food Compound Program Listed, category H1)

Materials of construction

MaterialBioprene
Inner layerBioprene

Literature

Brochures

  1. Bredel pumps (US).pdf
    PDF - 2.6mb

Datasheet

Recommended Products

  1. Bredel CIP hose pumps

    Bredel CIP hose pumps

    Flow rates to 8,500 L/h (37 USGPM) and pressures up to 16 bar (232 psi). Food quality hose compliant.

    Pumps - hose pumps

  2. Bredel DuCoNite pumps

    Bredel DuCoNite pumps

    Flow rates to 5,250 L/h (23.1 USGPM) and pressures up to 16 bar (232 psi). Paint-free electroplated pump housing.

    Pumps - hose pumps

Related Products

  1. NBR (Buna N) hose

    NBR (Buna N) hose

    NBR (Buna N) hose elements. Resistant to oils, greases, alkalis and detergents.

    Hose pump elements

  2. CSM hose

    CSM hose

    CSM hose elements. Outstanding resistance to strong, oxidising products and concentrated acids and bases.

    Hose pump elements

  3. EPDM hose

    EPDM hose

    EPDM hose elements. Excellent chemical resistance, especially to ketones, alcohols and concentrated acids.

    Hose pump elements

Our specialists are here to help you succeed.

To order a product or ask a question

Contact our experts