Pumps - panel mount pumps

100 series panel mount pumps

Overview

100 series low-flow pumps

The 100 series combines performance, practicality and design. With its iconic flip-top design it is an industry standard OEM product in medical device, biotechnology and diagnostic applications, and very popular in many other applications too. Delivering accurate, repeatable and low-pulse flow rates in a compact size, the 100 series is available in two versions; 114DV for tube life and 114 DVP for higher pressure. Pumps are highly engineered to deliver long tube life. Available in a range of colours and options including cover-open sensor, rotation sensor and customised occlusion.

Features

  • High accuracy and repeatable flows for single-channel, continuous tubing applications
  • Flow rates up to 349 mL/min for continuous use and up to 510 mL/min for intermittent use
  • 0.5 – 4.8 mm bore, 1.6 mm wall thickness tubing
  • High accuracy and repeatable flows up to medium pressures
  • Error-free tube change in seconds

Drives

  • 114DriveSure: 12 V to 48 V DC integrated stepper motor with Industrial Ethernet and analogue control options, sealed mounting plate and PC software (WM Connect)
  • 114ST: compact stepper motor for precise, digital speed control
  • 114FD: 12 V and 24 V simple DC motors at a range of speeds
  • 114VDL: brushless DC direct drive with integrated 0-4V analogue control

Technical summary

Motor typesDriveSure brushless DC motor, Fixed speed DC motor, NEMA 17 stepper motor, Stepper motor, Variable speed brushless DC motor 
Pumphead options114DV, 114DVP 
StandardsBS EN 55011-2016+A2-2021, BS EN 61010-1, BS EN IEC 61326-1-2021, CE, CSA C22.2 No. 61010-1-12/AMD1:2018, EN 61010-1:2010/A1:2019, FCC 47CFR (Part 15), IEC 61010-1:2010/AMD1:2016, RoHS, UL 61010-1:2012/R:2019-07 

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Performance

100 DriveSure ADC/En/Pn performance

Flow Rate (mL/min) by tube bore based on 0.1 rpm (Min) to 410 rpm (Max)
Pumphead 0.5 mm 0.8 mm 1.6 mm 2.4 mm 3.2 mm 4.0 mm 4.8 mm
Min Max Min Max Min Max Min Max Min Max Min Max Min Max
114DV 0.002 9.3 0.004 17.4 0.014 57.4 0.029 118 0.048 195 0.068 276.8 0.085 349
114DVP 0.002 9.3 0.004 17.4 0.014 57.4 0.029 118 0.048 195 0.068 276.8 0.085 349

Performance data is based on a 48 V DC power supply, pumping water, with 0 bar inlet and discharge pressure. Actual performance is dependent on power supply voltage (DriveSure range 12 V to 48 V DC). For further information contact your local Watson-Marlow representative.

Flow rates (ml/min) Tubing 1.6 mm wall
Tube bore (mm) (ml/rev) Speed (rpm)
100 400 600 (intermittent)
0.5 0.02 2.2 9.1 13.5
0.8 0.04 4.3 17 26
1.6 0.14 14 56 84
2.4 0.29 29 115 175
3.2 0.47 47.5 190 285
4.0 0.67 67 270 405
4.8 0.85 85 340 510
Flow rates (ml/min) Tubing 1.6 mm wall
Tube bore (mm) (ml/rev) Speed (rpm)
60 190 350*
0.5 0.02 1.4 4.3 8.0
0.8 0.04 2.6 8.2 15
1.6 0.14 8.4 26.5 49
2.4 0.29 17.5 55 100
3.2 0.47 28.5 90.5 165
4.0 0.67 40.5 128 235
4.8 0.85 51 160 300

*Low pressure applications only. Pumpsil up to 4.8 mm bore. Other tubing up to 3.2 mm bore.

100DriveSure/DV performance

Flow rates (ml/min) Tubing 1.6 mm wall
Tube bore (mm) Speed (rpm)
8 408
0.5 0.16 8
0.8 0.32 16
1.6 1.10 57
3.2 3.80 194
4.8 6.80 347

Flow rates are for guidance only at 0 bar. Always test pumphead flow capability in the relevant fluid system

Specifications

Technical specifications

100 DriveSure ADC/En/Pn100 ST/DV100 FD/DV
Motor typesNEMA 17 stepper motor Stepper motor Fixed speed DC motor 
Pumphead options114DV, 114DVP 114DV 114DV 
Number of rollers
Number of channels
Min. flow rate 0.002 ml/min2.2 ml/min1.4 ml/min
Max. flow rate349 ml/min510 ml/min300 ml/min
Min. operating speed0.1 rpm0 rpm
Max. operating speed410 rpm600 rpm350 rpm
Speed Resolution0.1 rpm
Supply voltage12 V to 48 V DC 24 V DC 12 V DC, 12 V DC, 24 V DC, 24 V DC 
Operating temperature range 5 °C to 40 °C-10 °C to 45 °C-10 °C to 45 °C
Operating temperature range 41 °F to 104 °F14 °F to 113 °F14 °F to 113 °F
Rated Power75 W 
Power consumption10W 5W 
Control options0–10 V, 2–2000 Hz, 4–20 mA, EtherNet/IP™, Fixed speed, Prime speed, PROFINET® Fixed speed 
AlarmsCover-open, Hardware fault, Over current, Over temperature, Software fault, Speed, Stall, Under/over voltage 
OutputsFault, Tacho 
External InputsPrime switch 
Weight0.8 - 0.9 kg0.45 kg0.3 kg
Weight1.764 - 1.984 lbs
LocationIndoor, Enclosure Indoor, Enclosure Indoor, Enclosure 
Ingress ProtectionIP66 capable panel sealing 
Humidity80 % up to 31 °C (88 °F), decreasing linearly to 50 % at 40 °C (104 °F) 
Noise<60 dB(A) 
Max. altitude2000 m
Max. altitude6561 ft
StandardsBS EN 55011-2016+A2-2021, BS EN IEC 61326-1-2021, CSA C22.2 No. 61010-1-12/AMD1:2018, EN 61010-1:2010/A1:2019, FCC 47CFR (Part 15), IEC 61010-1:2010/AMD1:2016, UL 61010-1:2012/R:2019-07 
Certification and complianceCB Certificate, EMC, NRTL certification 
Compatible tubing bore size 0.5, 0.8, 1.6, 2.4, 3.2, 4, 4.8 mm0.5, 0.8, 1.6, 2.4, 3.2, 4, 4.8 mm0.5, 0.8, 1.6, 2.4, 3.2, 4, 4.8 mm
Compatible tubing wall thickness 1.6 mm1.6 mm1.6 mm
Outputs are for ADC version only. Alarms are for EtherNet/IP™ & PROFINET® versions only. For detailed specifications of individual models refer to product reference manual or contact WMFTS representative.

100 DriveSure ADC/En/Pn dimensions

A B C D E F
mm in mm in mm in mm in mm in mm in
73 2.87 74 2.91 98 3.85 128 5.04 73 2.87 89 3.50

100 ST/DV dimensions

100 FD/DV dimensions

Materials of construction

Pumphead body assemblyGrilamid PA12, IXEF PARA
Pumphead body assemblyGrilamid PA12, Polyacrylamide—IXEF (PARA)
Pumphead rotor assemblyIXEF PARA
Pumphead rotor assemblyFPM rubber, Polyacrylamide—IXEF (PARA), PTFE filled PBT, Stainless steel
Pumphead roller assemblyPTFE filled PBT
BearingsStainless steel
Adaptor plateIXEF PARA
DriveshaftStainless steel
SpringsStainless steel
MotorAluminium, Plasma nitride coated stainless steel
Controller HousingABS/PC, Aluminium
Mounting plate assemblyNitrile, Polyacrylamide (PARA)-halogen free, UL94 V-0 rated, Thermoplastic elastomer (TPE)

Information listed covers the complete range. For detailed specifications of individual models/components refer to product reference manual or contact WMFTS representative.

Literature

Datasheet

  1. 100 DriveSure ADCEnPn datasheet (US).pdf
    PDF - 1mb
  2. 114VDL datasheet (EN).pdf
    PDF - 269.8kb
  3. 114ST datasheet (EN).pdf
    PDF - 267.4kb
  4. Original DriveSure datasheet (EN).pdf
    PDF - 375.3kb
  5. 114FDB datasheet (EN).pdf
    PDF - 254.9kb
  6. 114FD datasheet (EN).pdf
    PDF - 294.3kb
  7. 114FDC datasheet (EN).pdf
    PDF - 265kb

Manuals

  1. DriveSure ADC En Pn manual (EN).pdf
    PDF - 2.4mb
  2. 114 pumpheads manual (EN).pdf
    PDF - 1.6mb

Other Resources

  1. 100 DriveSure En.step
    STEP - 25.9mb
  1. GSDML-V2.42-Watson Marlow-WM DrivesurePn-20230427.zip
    ZIP - 3.9kb
  2. WatsonMarlowConnectInstaller-1.16.1.zip
    ZIP - 67mb
  1. 100 panel cutout.stp
    STP - 43.4kb
  1. WM-DrivesureEn-rev-1-5.eds
    EDS - 84.7kb

Videos

Order Information

Product codes

100 DriveSure ADC/En/Pn product codes

A
B
C
D
E
F
Product
Control
Cable length
Pumphead colour
Pumphead
Pressure
0 = Complete pump 4 = ADC 1 = 1 m (3.28 ft) cable 0 = No pumphead 0 = No pumphead 0 = No pumphead
6 = Drive only 8 = En (EtherNet/IPTM) 3 = 3 m (9.84 ft) cable 1 = Standard colour A = 114DV S = Standard pressure
9 = Pn (PROFINET®) 2 = Black P = Plus pressure
3 = White
Accessories and Spares
Product Product code
100 Series DriveSure Sealed Mounting Plate / Sensor 019.IPMP.DVS
DriveSure cable pack - 24 V power supply/USB-C - trials only * 009.24CP.DVS
DriveSure cable pack - 48 V power supply/USB-C - trials only * 009.48CP.DVS
1 m Power Cable DriveSure ADC/En/Pn 009.1PW.DVS
3 m Power Cable DriveSure ADC/En/Pn 009.3PW.DVS
1 m Control Cable DriveSure ADC 009.1CC.DVS
3 m Control Cable DriveSure ADC 009.3CC.DVS
Ethernet Cable, RJ45 to RJ45, CAT 5e SHIELDED, 3m 059.9123.000
PROFINET® Cable, RJ45 to RJ45, CAT 5e SHIELDED, 3m 059.9128.000

*Cable packs do not include mains power lead. If required, order power leads suitable for your region.

100 ST/DV product codes

Pump product codes
Description Supply Speed (rpm) with 114DV with 114DVP
114ST stepper motor drive 24 VDC 0 - 600 010.5Z2S.00A 010.5Z2S.P0A

# Low pressure applications only. Pumpsil up to 4.8 mm bore. Other tubing up to 3.2 mm bore

Tubing product codes for 114DV and 114DVP pumpheads
Bore/wall Pumpsil Marprene Bioprene STA-PURE PFL PVC* STA-PURE PCS
0.5/1.6 mm 913.A005.016 902.0005.016 933.0005.016
0.8/1.6 mm 913.A008.016 902.0008.016 933.0008.016
1.6/1.6 mm 913.A016.016 902.0016.016 933.0016.016 965.0016.016 E3603.016.16 960.0016.016
2.4/1.6 mm 913.A024.016 902.0024.016 933.0024.016
3.2/1.6 mm 913.A032.016 902.0032.016 933.0032.016 965.0032.016 E3603.032.16 960.0032.016
4.0/1.6 mm 933.0040.016 E3603.040.16
4.8/1.6 mm 913.A048.016 902.0048.016 933.0048.016 965.0048.016 E3603.048.16 960.0048.016

*recommended for 114DVP +pressure pumphead only

100 FD/DV product codes

Pump product codes
Description Supply Speed (rpm) with 114DV with 114DVP
114FD DC motor drive 12 VDC 60 010.5AM0.00A 010.5AM0.P0A
24 VDC 60 010.5BM0.00A 010.5BM0.P0A
12 VDC 190 010.5AS0.00A 010.5AS0.P0A
24 VDC 190 010.5BS0.00A 010.5BS0.P0A
12 VDC 350 010.5AU0.00A# 010.5AU0.P0A#
24 VDC 350 010.5BU0.00A# 010.5BU0.P0A#

# Low pressure applications only. Pumpsil up to 4.8 mm bore. Other tubing up to 3.2 mm bore

Tubing product codes for 114DV and 114DVP pumpheads
Bore/wall Pumpsil Marprene Bioprene STA-PURE PFL PVC* STA-PURE PCS
0.5/1.6 mm 913.A005.016 902.0005.016 933.0005.016
0.8/1.6 mm 913.A008.016 902.0008.016 933.0008.016
1.6/1.6 mm 913.A016.016 902.0016.016 933.0016.016 965.0016.016 E3603.016.16 960.0016.016
2.4/1.6 mm 913.A024.016 902.0024.016 933.0024.016
3.2/1.6 mm 913.A032.016 902.0032.016 933.0032.016 965.0032.016 E3603.032.16 960.0032.016
4.0/1.6 mm 933.0040.016 E3603.040.16
4.8/1.6 mm 913.A048.016 902.0048.016 933.0048.016 965.0048.016 E3603.048.16 960.0048.016

*recommended for 114DVP +pressure pumphead only

100DriveSure/DV product codes

Pump product codes
Description Motor control Product code
PMD24CV114 0 - 10 V Contact your local Watson-Marlow representative
PMD24CI114 4 - 20 mA Contact your local Watson-Marlow representative

For mounting plate options, test leads and further pumphead configurations, contact your local Watson-Marlow sales representative

Tubing product codes for 114DV and 114DVP pumpheads
Bore/wall Pumpsil Marprene Bioprene STA-PURE PFL PVC* STA-PURE PCS
0.5/1.6 mm 913.A005.016 902.0005.016 933.0005.016
0.8/1.6 mm 913.A008.016 902.0008.016 933.0008.016
1.6/1.6 mm 913.A016.016 902.0016.016 933.0016.016 965.0016.016 E3603.016.16 960.0016.016
2.4/1.6 mm 913.A024.016 902.0024.016 933.0024.016
3.2/1.6 mm 913.A032.016 902.0032.016 933.0032.016 965.0032.016 E3603.032.16 960.0032.016
4.0/1.6 mm 933.0040.016 E3603.040.16
4.8/1.6 mm 913.A048.016 902.0048.016 933.0048.016 965.0048.016 E3603.048.16 960.0048.016

*recommended for 114DVP +pressure pumphead only

Recommended Products

  1. 100 series pumpheads

    100 series pumpheads

    Iconic flip-pumps for low flows up to 510 ml/min. Accurate flow performance to medium pressures.

    Pumpheads

  2. Bioprene: Thermoplastic tubing

    Bioprene: Thermoplastic tubing

    Thermoplastic tubing with long peristaltic life and low permeability. 5 ºC to 80 ºC (23 ºF to 176 ºF).

    Tubing - peristaltic

  3. Pumpsil tubing

    Pumpsil tubing

    Platinum-cured silicone tubing with ultra smooth bore and excellent flow stability. -20 ºC to 80 ºC (-4 ºF to 176 ºF).

    Tubing - peristaltic

Related Products

  1. 400/M series compact pumps

    400/M series compact pumps

    One to eight channel pumps for medium flows to 200 ml/min. Compact design and Luer connectors for 'fit and forget' applications.

    Pumps - panel mount pumps

  2. 500 series high-flow pumps

    500 series high-flow pumps

    Durable, single channel pumps for high flows to 3,500 ml/min. Supports continuous tubing and Loadsure elements for high pressures.

    Pumps - panel mount pumps

Our pump specialists are here to help you succeed.

To order a product or ask a question

Contact our experts