弹性软管组件
Visiflon
概览
Visiflon
PTFE 内衬软管，用于汽车和通用应用
Visiflon 是一种完全卷曲的 PTFE 内衬软管产品，用于需要卓越灵活性的应用，而卷曲孔径并无坏处。
特点和优势
- 非常灵活且防扭结
- 耐高温
- 耐化学性
技术摘要
| 标称孔径 | 10 - 32 mm |
| 标称孔径 | 0.375 - 1.25 in |
| 外径 | 10.7 - 39 mm |
| 外径 | 0.42 - 1.537 in |
| 最大工作压力 | 60 bar |
| 最大工作压力 | 870 psi |
| 认证与合规 | 3.1 可追溯性, FDA（材料）, TS 16949:2016 |
| 弯曲半径 | 19 - 100 mm |
| 弯曲半径 | 0.75 - 4 in |
| Braid 类型 | 无 |
| 盖 | 无 |
“技术摘要”表列出了该范围内可用的功能。请参阅“规格”选项卡了解型号特定信息。
性能
聚丙烯编织 (PB) 级软管 性能
| 标称软管尺寸 | *实际软管孔径 | 软管等级 | 软管或编织层的外径 | 最小弯曲半径 | 最大工作压力 (MWP) | 单位长度的重量 | 软管零件号 | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| in | mm | in | mm | in | mm | in | mm | bar | psi | kg/mtr | lbs/ft | ||
| 3/8 | 10.0 | 1/4 | 6.3 | PB | 0.512 | 13.00 | 1 | 25 | 30 | 435 | 0.091 | 0.061 | 71-100-06-01-21 |
| 1/2 | 12.0 | 3/8 | 9.5 | PB | 0.662 | 16.80 | 11/2 | 38 | 23.5 | 340 | 0.125 | 0.084 | 71-100-08-01-21 |
| 5/8 | 16.0 | 1/2 | 12.7 | PB | 0.906 | 23.00 | 2 | 50 | 20 | 290 | 0.188 | 0.126 | 71-100-10-01-21 |
| 3/4 | 20.0 | 5/8 | 16.0 | PB | 0.973 | 24.70 | 21/2 | 63 | 16 | 230 | 0.226 | 0.151 | 71-100-12-01-21 |
| 1 | 25.0 | 7/8 | 22.0 | PB | 1.300 | 32.90 | 3 | 75 | 13 | 190 | 0.314 | 0.210 | 71-100-16-01-21 |
| 11/4 | 32.0 | 11/8 | 28.0 | PB | 1.537 | 39.00 | 31/2 | 89 | 12.5 | 180 | 0.444 | 0.298 | 71-100-20-01-21 |
| 11/2 | 40.0 | 13/8 | 35.0 | PB | 1.970 | 50.00 | 5 | 130 | 10 | 150 | 0.600 | 0.402 | 71-100-24-01-21 |
| 2 | 50.0 | 17/8 | 47.0 | PB | 2.521 | 64.00 | 6 | 150 | 7.5 | 110 | 0.917 | 0.614 | 71-100-32-01-21 |
| *Visiflon 软管组件要求将软管末端的卷曲层打开，以容纳液压或 PTFE 尾端接头。 | |||||||||||||
不锈钢编织 (SS) 级软管 性能
| 标称软管尺寸 | *实际软管孔径 | 软管等级 | 软管或编织层的外径 | 最小弯曲半径 | 最大工作压力 (MWP) | 单位长度的重量 | 软管零件号 | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| in | mm | in | mm | in | mm | in | mm | bar | psi | kg/mtr | lbs/ft | ||
| 3/8 | 10.0 | 1/4 | 6.3 | SS | 0.470 | 11.95 | 3/4 | 19 | 60 | 870 | 0.144 | 0.096 | 71-100-06-01-02 |
| 1/2 | 12.0 | 3/8 | 9.5 | SS | 0.600 | 15.25 | 1 | 25 | 47 | 680 | 0.195 | 0.130 | 71-100-08-01-02 |
| 5/8 | 16.0 | 1/2 | 12.7 | SS | 0.835 | 21.20 | 11/2 | 38 | 40 | 580 | 0.296 | 0.194 | 71-100-10-01-02 |
| 3/4 | 20.0 | 5/8 | 16.0 | SS | 0.894 | 22.70 | 2 | 50 | 32 | 460 | 0.376 | 0.251 | 71-100-12-01-02 |
| 1 | 25.0 | 7/8 | 22.0 | SS | 1.204 | 30.60 | 21/2 | 63 | 26 | 380 | 0.533 | 0.310 | 71-100-16-01-02 |
| 11/4 | 32.0 | 11/8 | 28.0 | SS | 1.420 | 36.00 | 3 | 75 | 25 | 360 | 0.729 | 0.489 | 71-100-20-01-02 |
| 11/2 | 40.0 | 13/8 | 35.0 | SS | 1.850 | 47.00 | 41/2 | 115 | 20 | 300 | 1.044 | 0.699 | 71-100-24-01-02 |
| 2 | 50.0 | 17/8 | 47.0 | SS | 2.400 | 61.00 | 5 | 130 | 15 | 220 | 1.378 | 0.923 | 71-100-32-01-02 |
| *Visiflon 软管组件要求将软管末端的卷曲层打开，以容纳液压或 PTFE 尾端接头。 | |||||||||||||
仅软管 (TO) 级软管 性能
| 标称软管尺寸 | *实际软管孔径 | 软管等级 | 软管或编织层的外径 | 最小弯曲半径 | 最大工作压力 (MWP) | 单位长度的重量 | 软管零件号 | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| in | mm | in | mm | in | mm | in | mm | bar | psi | kg/mtr | lbs/ft | ||
| 3/8 | 10.0 | 1/4 | 6.3 | 至 | 0.420 | 10.70 | 1 | 25 | 4 | 58 | 0.057 | 0.038 | 71-100-06 |
| 1/2 | 12.0 | 3/8 | 9.5 | 至 | 0.555 | 14.10 | 11/2 | 38 | 4 | 58 | 0.076 | 0.051 | 71-100-08 |
| 5/8 | 16.0 | 1/2 | 12.7 | 至 | 0.780 | 19.80 | 2 | 50 | 4 | 58 | 0.126 | 0.084 | 71-100-10 |
| 3/4 | 20.0 | 5/8 | 16.0 | 至 | 0.835 | 21.20 | 3 | 75 | 3 | 43 | 0.166 | 0.111 | 71-100-12 |
| 1 | 25.0 | 7/8 | 22.0 | 至 | 1.143 | 29.00 | 31/2 | 89 | 3 | 43 | 0.235 | 0.157 | 71-100-16 |
| 11/4 | 32.0 | 11/8 | 28.0 | 至 | 1.349 | 34.20 | 4 | 100 | 2 | 29 | 0.342 | 0.229 | 71-100-20 |
| 11/2 | 40.0 | 13/8 | 35.0 | 至 | 1.773 | 45.00 | 6 | 150 | 2 | 29 | 0.415 | 0.278 | 71-100-24 |
| 2 | 50.0 | 17/8 | 47.0 | 至 | 2.325 | 59.00 | 8 | 200 | 2 | 29 | 0.631 | 0.423 | 71-100-32 |
| *Visiflon 软管组件要求将软管末端的卷曲层打开，以容纳液压或 PTFE 尾端接头。 | |||||||||||||
规格
技术规格
| 聚丙烯编织 (PB) 级软管 | 不锈钢编织 (SS) 级软管 | 仅软管 (TO) 级软管 | |
| 标称孔径 | 10 - 32 mm (0.375 - 1.25 in) | 10 - 32 mm (0.375 - 1.25 in) | 10 - 32 mm (0.375 - 1.25 in) |
| 实际孔径 | 6.3 - 28 mm (0.25 - 1.125 in) | 6.3 - 28 mm (0.25 - 1.125 in) | 6.3 - 28 mm (0.25 - 1.125 in) |
| 长度 | 15 - 20 m (50 - 70 Ft) | 15 - 20 m (50 - 70 Ft) | 15 - 20 m (50 - 70 Ft) |
| 外径 | 13 - 39 mm (0.512 - 1.537 in) | 11.95 - 36 mm (0.47 - 1.42 in) | 10.7 - 34.2 mm (0.42 - 1.349 in) |
| 最大工作压力 | 30 bar (435 psi) | 60 bar (870 psi) | 4 bar (58 psi) |
| 认证与合规 | 3.1 可追溯性, FDA（材料）, TS 16949:2016 | 3.1 可追溯性, FDA（材料）, TS 16949:2016 | 3.1 可追溯性, FDA（材料）, TS 16949:2016 |
| 工作温度 | -73 °C 至 230 °C (-100 °F 至 450 °F) | -73 °C 至 230 °C (-100 °F 至 450 °F) | -73 °C 至 230 °C (-100 °F 至 450 °F) |
| 弯曲半径 | 25 - 89 mm (1 - 3.5 in) | 19 - 75 mm (0.75 - 3 in) | 25 - 100 mm (1 - 4 in) |
| 单位长度的重量 | 0.091 - 0.444 kg/m (0.061 - 0.298 lb/ft) | 0.144 - 0.729 kg/m (0.096 - 0.489 lb/ft) | 0.057 - 0.342 kg/m (0.0338 - 0.229 lb/ft) |
| Braid 类型 | 无 | ||
| 盖 | 无 | 无 | 无 |
| 端接头 | BSP 和 NPT 螺纹接头, JIC 接头, NPT 和 BSPT 接头, 平面凸耳螺母内螺纹接头, 立柱接头, 软管接头 | BSP 和 NPT 螺纹接头, JIC 接头, NPT 和 BSPT 接头, 平面凸耳螺母内螺纹接头, 立柱接头, 软管接头 | BSP 和 NPT 螺纹接头, JIC 接头, NPT 和 BSPT 接头, 平面凸耳螺母内螺纹接头, 立柱接头, 软管接头 |
| 耐真空度 | 耐真空度为 -0.9 bar，最高可达 80 °C (176 °F) | 耐真空度为 -0.9 bar，最高可达 130 °C (266 °F) | 耐真空度为 -0.9 bar，最高可达 80 °C (176 °F) |
主要材料
| 聚丙烯编织 (PB) 级软管 | 不锈钢编织 (SS) 级软管 | 仅软管 (TO) 级软管 | |
| 衬套管 | 天然 PTFE, 防静电 PTFE | 天然 PTFE, 防静电 PTFE | 天然 PTFE, 防静电 PTFE |
| 编织 | 聚丙烯 | 不锈钢 |
文档
数据表
-
Visiflon Polypropylene braid (PB) grade hoses datasheet (ZH).pdf
PDF - 292.1kb -
Visiflon Tube only (TO) grade hoses datasheet (ZH).pdf
PDF - 288.7kb -
Visiflon Stainless steel braid (SS) grade hoses datasheet (ZH).pdf
PDF - 395.6kb
可选配件和附件
编织、包裹和外部保护
| 软管 | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Bioflex Ultra | Pharmaline N | Pharmaline X | FaBLINE | Corroflon | Corroline+ | Smoothbore | Hyperline FX | Visiflon | |
| 仅软管 - TO | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
| 不锈钢 - SS | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
| 橡胶盖 - RC | ✔ | ✔ | ✔ | ✔ | |||||
| 聚丙烯编织 - PB | ✔ | ✔ | |||||||
| 铂金硫化 - SI | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
| 编织 | |||||||||
| Bioflex Ultra | Pharmaline N | Pharmaline X | FaBLINE | Corroflon | Corroline+ | Smoothbore | Hyperline FX | Visiflon | |
| 塑料橡胶选件 | ✔ | ✔ | ✔ | ||||||
| Aramid | ✔ | ||||||||
| Kynar 编织 | ✔ | ||||||||
| 哈氏合金编织 | ✔ | ||||||||
| 蓝色 EPDM | ✔ | ✔ | ✔ | ||||||
| 黑色 EPDM | ✔ | ✔ | ✔ | ||||||
| 外部保护 | |||||||||
| Bioflex Ultra | Pharmaline N | Pharmaline X | FaBLINE | Corroflon | Corroline+ | Smoothbore | Hyperline FX | Visiflon | |
| 保护套 - SG | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
| 磨损环 - SR | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
| 保护圈 - PC | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
| 双橡胶盖端保护 - RC300 | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
| 双橡胶盖端保护 - DBK300 | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
端接头
| Bioflex Ultra | Pharmaline N | Pharmaline X | FaBLINE | Corroflon | Corroline+ | Smoothbore | Hyperline FX | Visiflon | |
|---|---|---|---|---|---|---|---|---|---|
| 转节法兰接头 - 非内衬 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
| 转节法兰接头 - 内衬 | ✔ | ✔ | ✔ | ✔ | |||||
| 外螺纹非内衬快装接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
| 外螺纹内衬快装接头 | ✔ | ✔ | ✔ | ✔ | |||||
| 内螺纹非内衬快装接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
| 内螺纹内衬快装接头 | ✔ | ✔ | ✔ | ✔ | |||||
| 卫生级 Triclamp 接头 PTFE 内衬和展开 | ✔ | ✔ | ✔ | ||||||
| 卫生级 Triclamp 接头 - 非内衬 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
| 卫生级和微型卫生级 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
| 卫生级 Triclamp 接头 - 90° 弯管接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
| DIN 11851 / SMS 接头 - PTFE 内衬 | ✔ | ✔ | ✔ | ||||||
| DIN 11851 接头 - 非内衬 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
| RJT 内螺纹接头 - 非内衬 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | |||
| BSP 和 NPT 螺纹接头 - NPT 和 BSPT 接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| BSP 和 NPT 螺纹接头 - BSP 60° 锥形阀座内螺纹接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| JIC 接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| PTFE 水封管接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
| 3-A 卫生级接头 | ✔ | ✔ | ✔ | ✔ | |||||
| 90° 弯管接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| 槽形立柱接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
| IDF 内螺纹/外螺纹 - 非内衬 | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
| ENCAP 接头 | ✔ | ✔ | ✔ | ✔ | ✔ | ||||
| PTFE 尾部或液压接头 | ✔ | ✔ | ✔ | ||||||
| PTFE 尾部接头 | ✔ | ✔ | ✔ | ✔ |