Valves - diaphragms

PTFE diaphragms

Order a sample
Order a sample

Overview

PTFE diaphragms

Polytetrafluoroethylene (PTFE) offer the ultimate chemical resistance and purity. Our PTFE diaphragms are extremely chemically resistant, often used with heptane and methyl chloride.

All our diaphragms are laser-etched with cure dates and batch numbers, ensuring that they are completely traceable.

Features and benefits

Technical summary

Diaphragm variant(s)Bellows 
Compatible actuatorsModified AJS 
Material specificationVirgin PTFE 8AX 
StandardsASME BPE, RoHS 

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Share

Performance

Performance

Flow Coefficient (under standard configuration)
Outlet size Size CV at 1 psi (0.07 bar) KV at 1 psi (0.07 bar)
0.5" 4.3 3.7
1.0" 15.8 13.7
1.5" 48.0 41.5
2.0" 72.0 62.2
3.0" 170.0 146.9
4.0" 302.0 260.9

Specifications

Technical specifications

PTFE diaphragms
Tank valve sizes0.5" Extended, 1.0", 1.5", 2.0", 3.0" 
ColourWhite 
Diaphragm variant(s)Bellows 
Parylene treatmentNo 
Operating temperature range 4 °C to 177 °C
Operating temperature range 39 °F to 350 °F
Compatible actuatorsModified AJS 
Actuator typeManual, Pneumatic 
Steaming required prior to installationYes 
ASME BPE appendix K SIP cycle rating300 
Total actuations during SIP cycle testing3000 
Shelf life5 years
Material specificationVirgin PTFE 8AX 
StandardsASME BPE, RoHS 
Certification21 CFR 177.1550, ADCF, BSE/TSE free, USP <87>, USP <88> Class VI 

Materials of construction

DiaphragmVirgin PTFE 8AX
Inserts304 SS

Literature

Brochures

  1. ASEPCO weirless radial diaphragm valves (EN).pdf
    PDF - 600.3kb

Datasheet

  1. ASEPCO diaphragms datasheet (EN).pdf
    PDF - 234.5kb

Order Information

Product codes

Code Product

PF10-1

Radial diaphragm 1" PTFE assembly for standard Asepco actuators, White

PF17-1

Radial diaphragm 1.5" PTFE assembly for standard Asepco actuators, White

PF20-1

Radial diaphragm 2" PTFE assembly for standard Asepco actuators, White

PF30-1

Radial diaphragm 3" PTFE assembly for standard Asepco Actuators, White

PFG05-1

Radial diaphragm extended .5" PTFE assembly for standard Asepco actuators

Recommended Products

  1. Divert valves

    Divert valves

    Designed to allow division and blending of two or three fluid paths in a single assembly. Eliminates dead legs.

    Valves - tank valves

  2. Insulate valves

    Insulate valves

    Use with freeze tanks or tanks requiring critical temperature control. Extended body and diaphragm.

    Valves - tank valves

  3. Point-of-use valves

    Point-of-use valves

    Created for low-point draining or sampling in piping systems, this valve eliminates dead legs and helps promote drainage.

    Valves - tank valves

  4. Process valves

    Process valves

    A valve with a simple clamp connection for easy installation. Allows steam-in-place or flush through, without dead legs.

    Valves - tank valves

  5. Retrofit valves

    Retrofit valves

    Used to add ASEPCO valves to existing tanks. Many different designs to fit your specific situation.

    Valves - tank valves

  6. Tangential valves

    Tangential valves

    Off-centre outlet for full drainability when installed on the slope of a vessel head.

    Valves - tank valves

  7. Tank-bottom valves

    Tank-bottom valves

    The leading aseptic tank-bottom valve. Available in multiple configurations including custom-machined.

    Valves - tank valves

  8. Zero dead leg valves

    Zero dead leg valves

    For use in situations where sampling, draining, transferring or directing fluid from a line is necessary.

    Valves - tank valves

  9. I-Sample valves

    I-Sample valves

    Designed with through-the-chamber CIP/SIP via 1/4- to 1/2-inch ports, ensuring a truly representative sample every time.

    Valves - sampling

  10. Sample valves

    Sample valves

    Consistent sampling every time. Behind-the-seat-flow path allows for easy clean-in-place/steam-in-place between samples.

    Valves - sampling

  11. Tank valve pneumatic actuators

    Tank valve pneumatic actuators

    Pneumatic version AJS actuator series for heavy-duty applications or AKS actuator series for lighter weight needs.

    Valves - actuators

Related Products

  1. EPDM diaphragms

    EPDM diaphragms

    EPDM diaphragms. Not suitable for use with solvents or petroleum agents.

    Valves - diaphragms

  3. Viton diaphragms

    Viton diaphragms

    Excellent heat and chemical resistance. Not suitable for use with ketones and esters. Steam resistant version available.

    Valves - diaphragms

Our specialists are here to help you succeed.

To order a product or ask a question

Contact our experts