Tubing - peristaltic

Maxthane tubing elements

Overview

Maxthane tubing elements

Maxthane is the perfect choice for peristaltic dosing and metering applications. Fully recyclable thermoplastic polyurethane construction achieves high-performance pumping with reduced environmental impact. The quick-change Loadsure element design ensures easy changeover. The tubing elements are compatible with all types of vegetable oil and CIP chemicals.

Food-grade compliance

  • FDA regulations 21 CFR177.1680
  • EC1935/2004, EU 10/2011

Use Maxthane with 505LT and 520RET pumpheads.

Features and benefits

  • High-performance pumping with reduced environmental impact
  • Perfect for flavour, colour and additive dosing in food manufacturing
  • Food-grade compliance: FDA regulations 21 CFR177.1680, EC1935/2004, EU 10/2011

Technical summary

SpallationVery low 
Certification and ComplianceEU Regulation 10/2011, FDA 21CFR177.1680, Regulation (EC) No 1935/2004 
Shelf life5 years

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Performance

LoadSure® Elements Maximum pumping pressure
Bore mm Bore inch Bar psi
3.2 1/8 7 100
6.4 1/4 4 60
9.6 3/8 2 30

Pumping life

The graphs show the pumping life of Maxthane® LoadSure® elements for all bore sizes.

Specifications

Technical specifications

Maxthane
Bore size3.2 - 9.6 mm
Bore size0.125 - 0.375 in
Wall thickness1.6 mm
Wall thickness0.0625 in
ColourColourless 
TransparencyTransparent 
SpallationVery low 
Certification and ComplianceEU Regulation 10/2011, FDA 21CFR177.1680, Regulation (EC) No 1935/2004 
Operating temperature range 4 °C to 45 °C
Operating temperature range 39 °F to 113 °F
Hardness, shore A (5sec)87 
Specific gravity1.2 g/cm³
UV resistance Good 
Tear B70 kN/m
Tear B619,552 ppi
Tear B4.8 kips/ft
Ultimate tensile strength460 bar
Ultimate tensile strength6672 psi
Ultimate tensile strength46 MPa
Elongation at break600 %
Tensile stress at 100% elongation5 Mpa
Tensile stress at 100% elongation725 Psi
Shelf life5 years
Compatible pumps530 cased pumps 
Test methods—Hardness: ASTM D 2240; Tear B: ISO 34-1B Tear nicked; Specific gravity: ISO 2781; Ultimate tensile strength, Elongation at break, Tensile stress at 100% elongation; ISO 527-2/5A/500; Vicat softening point: ISO 306 (A50); Abrasion resistance: ISO 4649-B. Values reported above are not intended for sales specification and some properties are not routinely measured. May discolour to a darker shade of yellow with UV exposure. For occasional use the maximum operating temperature is 65 °C (149 °F). Do not steam sterilise articles made with thermoplastic polyurethanes—Methylene dianiline can be generated as a result.

Materials of construction

TubingThermoplastic polyurethane
Connector materialPVDF

Literature

Datasheet

  1. Maxthane datasheet (US).pdf
    PDF - 699,1kb

Other Resources

  1. Maxthane declaration of compliance (EN).pdf
    PDF - 768kb

Animation

Order Information

Product codes

Maxthane product codes

Maxthane peristaltic elements sizes available1

LoadSure® Elements
Bore mm Bore inch Part number
3.2 1/8 945.0032.PFT
6.4 1/4 945.0064.PFT
9.6 3/8 945.0096.PFT
Pumpheads
520RET Element Pumphead 053.1011.ET0

1-LoadSure® Elements require a 520RET pumphead.

Recommended Products

  1. 530 process pumps

    530 process pumps

    Flow rates to 3.5 L/min (55 USGPH) and pressures up to 7 bar (100 psi). Precise 2,200:1 speed control range.

    Pumps - cased pumps

Related Products

  1. Bioprene: Thermoplastic tubing

    Bioprene: Thermoplastic tubing

    Thermoplastic tubing with long peristaltic life and low permeability. 5 ºC to 80 ºC (23 ºF to 176 ºF).

    Tubing - peristaltic

  2. LoadSure elements

    LoadSure elements

    LoadSure elements allow pump tubing to be changed in under one minute, to achieve perfect tube alignment and tension.

    Tubing - peristaltic

  3. Marprene tubing

    Marprene tubing

    Thermoplastic elastomer tubing especially resistant to oxidizing agents. 5 ºC to 80 ºC (23 ºF to 176 ºF) to 7 bar (100 psi).

    Tubing - peristaltic

  4. Pumpsil tubing

    Pumpsil tubing

    Platinum-cured silicone tubing with ultra smooth bore and excellent flow stability. -20 ºC to 80 ºC (-4 ºF to 176 ºF).

    Tubing - peristaltic

  5. PureWeld XL tubing

    PureWeld XL tubing

    High performance TPE tubing with exceptional life and accurate flow rates. Weldable and sealable for sterile connectivity.

    Tubing - peristaltic

Our tubing specialists are here to help you succeed.

To order a product or ask a question

Contact our experts