Divert valves
Designed to allow division and blending of two or three fluid paths in a single assembly. Eliminates dead legs.
Valves - tank valves
Our tank valve manual actuators are available in 2 series; AJS series for heavy-duty applications or the AKS series for lighter weight needs.
The AJS actuator series of heavy-duty actuators is also easy to maintain and ideally suited to applications where stainless is preferred. These actuators are available in 0.5" through 4.0" sizes for our tank valves.
| Max. operating pressure | 10 bar |
| Max. operating pressure | 150 psi |
| Compatible valves | Standard (90 degree) Weirless Radial diaphragm tank valves |
| Certification and compliance | ISO 9001 |
| Standards | 3-A, ASME BPE, CE-PED |
Technical Summary table lists features available within the range. See ‘Technical specifications’ tab for model specific information.
| AJS Series actuators | AKS Series actuators | |
| Sizes | 0.5", 1.0", 1.5", 2.0", 3.0", 4.0" | 0.5", 1.0", 1.5" |
| Max. operating pressure | 150 psi (10 bar) | 150 psi (10 bar) |
| Compatible valves | Standard (90 degree) Weirless Radial diaphragm tank valves | Standard (90 degree) Weirless Radial diaphragm tank valves |
| Certification and compliance | ISO 9001 | ISO 9001 |
| Standards | 3-A, ASME BPE, CE-PED | 3-A, ASME BPE, CE-PED |
| Size | A mm (inch) | B mm (inch) | Max travel mm (inch) | Weight (with plastic handle) kg (lb) | Clearance required for removal mm (inch) |
|---|---|---|---|---|---|
| 0.5 | 61.0 (2.4) | 50.8 (2.0) | 5.6 (0.2) | 0.5 (1.1) | 86.4 (3.4) |
| 1.0 | 71.1 (2.8) | 76.2 (3.0) | 7.9 (0.3) | 1.0 (2.2) | 104.1 (4.1) |
| 1.5 | 99.1 (3.9) | 76.2 (3.0) | 14.2 (0.6) | 1.1 (2.4) | 142.2 (5.6) |
| 2.0 | 111.8 (4.4) | 119.4 (4.7) | 14.2 (0.6) | 2.1 (4.7) | 142.2 (5.6) |
| 3.0 | 111.8 (4.4) | 119.4 (4.7) | 19.8 (0.8) | 2.1 (4.7) | 193.0 (7.6) |
| 4.0 | 139.7 (5.5) | 165.1 (6.5) | 25.4 (1.0) | 6.2 (13.7) | 246.4 (9.7) |
| Size | A mm (inch) | B mm (inch) | Max travel mm (inch) | Weight kg (lb) | Clearance required for removal mm (inch) |
|---|---|---|---|---|---|
| 0.5 | 73.0 (2.9) | 50.4 (2.0) | 4.4 (0.2) | 0.4 (0.8) | 124.5 (4.9) |
| 1.0 | 80.4 (3.2) | 75.8 (3.0) | 5.1 (0.2) | 0.7 (1.5) | 157.5 (6.2) |
| 1.5 | 80.4 (3.2) | 75.8 (3.0) | 8.4 (0.3) | 0.7 (1.5) | 157.5 (6.2) |
| Housing | Black anodized aluminum, Nylon, Stainless steel 304 |
| Actuator shaft | Gall-Tough® stainless steel, Nitronic 60 stainless steel, Stainless steel 304 |
| O-ring | EPDM |
| Seals | EPDM |
| Bearings | Nylon, Stainless steel |
| Product number | Product description |
|---|---|
| MN05 | 0.5" Weirless Radial tank valve AJS manual actuator |
| MN10 | 1.0" Weirless Radial tank valve AJS manual actuator |
| MN17 | 1.5" Weirless Radial tank valve AJS manual actuator |
| MN20 | 2.0" Weirless Radial tank valve AJS manual actuator |
| MN30 | 3.0" Weirless Radial tank valve AJS manual actuator |
| MN40 | 4.0" Weirless Radial tank valve AJS manual actuator |
| Product number | Product description |
|---|---|
| MN05-01 | 0.5" Weirless Radial tank valve AKS manual actuator |
| MN10-01 | 1.0" Weirless Radial tank valve AKS manual actuator |
| MN17-01 | 1.5" Weirless Radial tank valve AKS manual actuator |
Designed to allow division and blending of two or three fluid paths in a single assembly. Eliminates dead legs.
Valves - tank valves
Use with freeze tanks or tanks requiring critical temperature control. Extended body and diaphragm.
Valves - tank valves
Created for low-point draining or sampling in piping systems, this valve eliminates dead legs and helps promote drainage.
Valves - tank valves
A valve with a simple clamp connection for easy installation. Allows steam-in-place or flush through, without dead legs.
Valves - tank valves
Used to add ASEPCO valves to existing tanks. Many different designs to fit your specific situation.
Valves - tank valves
An integrated steam valve added to our tank-bottom valve. Allows steam-in-place or flush through, without dead legs.
Valves - tank valves
The leading aseptic tank-bottom valve. Available in multiple configurations including custom-machined.
Valves - tank valves
For use in situations where sampling, draining, transferring or directing fluid from a line is necessary.
Valves - tank valves
EPDM diaphragms. Not suitable for use with solvents or petroleum agents. Parylene surface treated version available.
Valves - diaphragms
Long-lasting, quick-change diaphragms. Extremely chemical and steam resistant. Only available for tank valves.
Valves - diaphragms
Valve diaphragms. Medical grade silicone available in white or clear finish. Parylene surface treated version available.
Valves - diaphragms
Excellent heat and chemical resistance. Not suitable for use with ketones and esters. Steam resistant version available.
Valves - diaphragms
Durable, easy to maintain manual actuators made of a plastic housing and stainless steel diaphragm interface.
Valves - actuators
Durable, easy to maintain pneumatic actuators made of a plastic housing and stainless steel diaphragm interface.
Valves - actuators
Manual version AJS actuator series for heavy-duty applications or AKS actuator series for lighter weight needs.
Valves - actuators
To order a product or ask a question