Sterillite valves
An integrated steam valve added to our tank-bottom valve. Allows steam-in-place or flush through, without dead legs.
Valves - tank valves
Call +65 6455 7411
ASEPCO close couple connectors are for connecting flush-mounted probes and instruments to process lines. They are easier to install and clean than the alternatives, and have ASEPCO's patented aseptic seal, which is based on the same reliable seal that you find in our valves.
Mounting type | Clamp, Screw in |
Surface finish options | Electropolished, Max 10 micro-inch Ra (0.25 µm Ra), Max 15 micro-inch Ra (0.375 µm Ra), Max 20 micro-inch Ra (0.5 µm Ra) |
Certification and compliance | ISO 9001 |
Standards | ASME BPE, CE-PED |
Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.
ASEPTIPORT probe mount | |
---|---|
Mounting type | Clamp, Screw in |
Operating gauge pressure range | -1 barg to 7 barg |
Operating gauge pressure range | -14.5 psig to 101.5 psig |
Surface finish options | Electropolished, Max 10 micro-inch Ra (0.25 µm Ra), Max 15 micro-inch Ra (0.375 µm Ra), Max 20 micro-inch Ra (0.5 µm Ra) |
Certification and compliance | ISO 9001 |
Standards | ASME BPE, CE-PED |
Material | Hastelloy C22, Hastelloy C276, Stainless steel 316L, Stainless steel AL-6XN |
Product number | Product description |
---|---|
AM-0001-1 | Aseptiport probe manifold, 3 probe assemblies, 12mm, 0.5" sample valve, 0.5" outlet and steam port, 316L, 20 micro inch Ra max., EP. Note: Valve requires separate diaphragm and actuator. |
AM-0200-0 | Aseptiport mount 2" Clamp-end Double 12mm probe mount, threaded, 316L,15 micro-inch Ra surface finish Electropolished and passivated |
AM-0200-2 | Aseptiport assembly, 2" Clamp end Double Manifold Complete, 2 X 12mm probe, Thread mount 316L |
AM-0202 | Aseptiport assembly, 2" Clamp end Double Manifold Complete, Thread mount 316L |
AM-0300-2 | Aseptiport assembly 3 X 25mm dia X 120mm long probe Manifold Complete 3" Clamp mount 316L |
AM-0400-2 | Aseptiport assembly 2 X 25mm dia X 120 mm long probe Manifold port Complete 4" Clamp mount 316L |
PA-0200 | Aseptiport insert Sleeve fits 25mm ingold port Fits 120mm probe Thread mount Nitronic 60,15 micro-inch Ra surface finish Electropolished and passivated |
PA-0201 | Aseptiport insert Plug fits 25mm ingold port Thread mount, Nitronic 60 |
An integrated steam valve added to our tank-bottom valve. Allows steam-in-place or flush through, without dead legs.
Valves - tank valves
Our best-selling in-line valve featuring a 180 degree install angle with superior drainability in multiple orientations.
Valves - inline valves
Pneumatic version AJS actuator series for heavy-duty applications or AKS actuator series for lighter weight needs.
Valves - actuators
Use with freeze tanks or tanks requiring critical temperature control. Extended body and diaphragm.
Valves - tank valves
Off-centre outlet for full drainability when installed on the slope of a vessel head.
Valves - tank valves
Long-lasting, quick-change diaphragms. Extremely chemical and steam resistant. Only available for tank valves.
Valves - diaphragms
A valve with a simple clamp connection for easy installation. Allows steam-in-place or flush through, without dead legs.
Valves - tank valves
Created for low-point draining or sampling in piping systems, this valve eliminates dead legs and helps promote drainage.
Valves - tank valves
The leading aseptic tank-bottom valve. Available in multiple configurations including custom-machined.
Valves - tank valves
Designed to allow division and blending of two or three fluid paths in a single assembly. Eliminates dead legs.
Valves - tank valves
Used to add ASEPCO valves to existing tanks. Many different designs to fit your specific situation.
Valves - tank valves
For use in situations where sampling, draining, transferring or directing fluid from a line is necessary.
Valves - tank valves
Close-coupled connector for connecting flush-mounted valves to tanks or inline pipes. Eliminates dead legs and leakage.
Valves - connectors
Close-coupled inline connector for connecting flush-mounted valves to tanks or inline pipes.
Valves - connectors
To order a product or ask a question