Pumps - cased pumps

300 series cased pump

Overview

300 series laboratory pumps

300 series laboratory pumps are a benchtop pumping solution with manual, remote, analogue or RS232 control capabilities. Featuring a chemically resistant ABS top and IP31 protection, 323 pumps have a membrane keypad that controls the pump, and a digital LCD to display speed. There are four models with increasing degrees of functionality:

  • 323Du RS232/auto/manual enhanced-control high-flow pumps
  • 323U and 323U analogue-auto and enhanced manual-control pumps
  • 323S high-performance manual control pumps
  • 323E manual control pumps

Pumphead options available as standard (others available on request):

  • 313D and 313D2 three-roller pumpheads for continuous tubing
  • 314D and 314D2 four-roller pumpheads for continuous tubing
  • 314MC four-roller five-channel microcassette pumpheads
  • 318MC eight-roller five-channel microcassette pumpheads
  • 501RL and 501RL2 pumpheads for continuous tubing

 

Features and benefits

  • Manual or remote 4 mA to 20 mA or 0 V to 10 V analogue auto-control or RS232 control commands
  • Up to 133:1 enhanced digital manual speed control
  • Keypad lock prevents tampering or accidental changes
  • MemoDose facility for accurate single-shot dosing
  • Digital TTL inputs for run/stop and direction
  • Instantly reversible
  • Two-year warranty

Technical summary

Max. flow rate3000 ml/min
Min. flow rate 0.002 ml/min
Speed control ratio133:1, 147:1, 200:1, 27:1, 300:1 
Operating temperature range 5 °C to 40 °C
Operating temperature range 40 °F to 104 °F
Drive standardsCE, cETLus 
Drive ingress protectionIP31 
Drive power supply1ph, 100 V to 120 V, 220 V to 240 V 50/60 Hz, 100 VA 
Compatible tubing bore size 0.13, 0.19, 0.25, 0.38, 0.5, 0.63, 0.76, 0.8, 0.88, 1.02, 1.14, 1.29, 1.42, 1.52, 1.6, 1.65, 1.85, 2.05, 2.29, 2.54, 2.79, 3.2, 4.8, 6.4, 8 mm

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Performance

323 Drive with 313D pumphead performance

313D three-roller flip-top pumpheads for continuous tubing — Tube bore and flow rates (ml/min)
Speed rpm 1.6 mm 3.2 mm 4.8 mm 6.4 mm 8.0 mm
323E/D 15 - 400 4.1 - 110 15 - 400 33 - 880 54 - 1400 75 - 2000
323S/D 3 - 400 0.81 - 110 3.0 - 400 6.6 - 880 11 - 1400 15 - 2000
323U/D 3 - 400 0.81 - 110 3.0 - 400 6.6 - 880 11 - 1400 15 - 2000
323Du/D 3 - 400 0.81 - 110 3.0 - 400 6.6 - 880 11 - 1400 15 - 2000
323Dz/D 2.0 - 400 0.54-110 2.0-400 4.4-880 7.2-1400 10-2000

323 Drive with 314D pumphead performance

314D four-roller flip-top pumpheads for continuous tubing — Tube bore and flow rates (ml/min)
Speed rpm 1.6 mm 3.2 mm 4.8 mm 6.4 mm 8.0 mm
323Dz/4D 2.0 - 400 0.5 - 100 1.7 - 340 3.8 - 760 6 - 1200 8 - 1600

323 Drive with 501RL pumphead performance

501RL spring-loaded single-channel pumpheads for continuous 1.6 mm wall thickness tubing — Tube bore and flow rates (ml/min)
Speed rpm 0.5 mm 0.8 mm 1.6 mm 3.2 mm 4.8 mm 6.4 mm 8.0 mm
323S/RL 1.5-220 0.06-9.2 0.18-27 0.84-94 2.8-410 6.1-890 9.5-1400 15-2200
323U/RL 1.5-220 0.06-9.2 0.18-27 0.84-94 2.8-410 6.1-890 9.5-1400 15-2200
323Du/RL 1.5-220 0.06-9.2 0.18-27 0.84-94 2.8-410 6.1-890 9.5-1400 15-2200
323Dz/RL 1.0 - 300 0.04 - 13 1.12 - 37 0.43 - 130 1.9 - 560 4 - 1200 6.4 - 1900 10 - 3000

323 Drive with MC4 pumphead performance

MC4 four-roller five-channel microcassette pumpheads — Tube bore and flow rates (ml/min)
Tube codes Orange/ Black Orange/ Red Orange/ Blue Orange/ Green Orange/ Yellow Orange/ White Black/ Black Orange/ Orange White/ White Red/ Red
Bore mm 0.13 0.19 0.25 0.38 0.50 0.63 0.76 0.88 1.02 1.14
3.0rpm 0.002 0.01 0.01 0.03 0.05 0.08 0.13 0.17 0.22 0.27
110rpm 0.09 0.3 0.5 0.9 1.7 3.1 4.6 6.4 8.1 9.9
Tube code Grey/ Grey Yellow/ Yellow Yellow/ Blue Blue/ Blue Green/ Green Purple/ Purple Purple/ Black Purple/ Orange Purple/ White
Bore mm 1.29 1.42 1.52 1.65 1.85 2.05 2.29 2.54 2.79
3.0rpm 0.35 0.46 0.52 0.60 0.76 0.90 1.1 1.3 1.4
110rpm 13 17 19 22 28 33 40 47 53

323 Drive with MC8 pumphead performance

MC8 eight-roller five-channel low-flow microcassette pumpheads — Tube bore and flow rates (ml/min)
Tube codes Orange/ Black Orange/ Red Orange/ Blue Orange/ Green Orange/ Yellow Orange/ White Black/ Black Orange/ Orange White/ White Red/ Red
Bore mm 0.13 0.19 0.25 0.38 0.50 0.63 0.76 0.88 1.02 1.14
323Du/MC8 3.0 rpm 0.002 0.01 0.01 0.02 0.04 0.07 0.11 0.14 0.18 0.24
110 rpm 0.09 0.3 0.5 0.8 1.4 2.6 3.9 5.3 6.6 8.8
323S/D 3.0 rpm 0.002 0.01 0.01 0.03 0.05 0.08 0.13 0.17 0.22 0.27
110 rpm 0.09 0.3 0.5 0.9 1.7 3.1 4.6 6.4 8.1 9.9
Tube code Grey/ Grey Yellow/ Yellow Yellow/ Blue Blue/ Blue Green/ Green Purple/ Purple Purple/ Black Purple/ Orange Purple/ White
Bore mm 1.29 1.42 1.52 1.65 1.85 2.05 2.29 2.54 2.79
323Du/MC8 3.0 rpm 0.27 0.33 0.38 0.46 0.55 0.65 0.79 0.90 0.98
110 rpm 10 12 14 17 20 24 29 33 36
323S/D 3.0 rpm 0.35 0.46 0.52 0.60 0.76 0.90 1.1 1.3 1.4
110 rpm 10 12 14 17 20 24 29 33 36

Specifications

Technical specifications

323 Drive with 313D pumphead323 Drive with 313D2 pumphead323 Drive with 314D pumphead323 Drive with 501RL pumphead323 Drive with 501RL2 pumphead323 Drive with MC4 pumphead323 Drive with MC8 pumphead
Pumphead number of rollers
Pumphead number of channels
Max. flow rate2000 ml/min2000 ml/min1600 ml/min3000 ml/min53 ml/min53 ml/min
Min. flow rate 0.06 ml/min0.81 ml/min0.6 ml/min0.04 ml/min0.002 ml/min0.002 ml/min
Speed control ratio133:1, 200:1, 27:1 133:1, 27:1 200:1 147:1, 300:1 147:1 133:1 133:1 
Max. operating speed400 rpm400 rpm400 rpm300 rpm200 rpm400 rpm400 rpm
Min. operating speed2 rpm3 rpm2 rpm1 rpm1.5 rpm3 rpm3 rpm
Operating temperature range 5 °C to 40 °C5 °C to 40 °C5 °C to 40 °C5 °C to 40 °C5 °C to 40 °C5 °C to 40 °C5 °C to 40 °C
Operating temperature range 40 °F to 104 °F40 °F to 104 °F40 °F to 104 °F40 °F to 104 °F40 °F to 104 °F40 °F to 104 °F40 °F to 104 °F
Weight4.7 kg4.7 kg4.7 kg5.6 kg5.6 kg5 kg5 kg
Weight10.4 lbs10.4 lbs10.4 lbs12.3 lbs12.3 lbs11 lbs11 lbs
Drive control optionsDu, Dz, E, S, U Du, E, S, U Dz Du, Dz, S, U Du, S Du, S 
Drive standardsCE, cETLus CE, cETLus CE, cETLus CE, cETLus CE, cETLus CE, cETLus CE, cETLus 
Drive ingress protectionIP31 IP31 IP31 IP31 IP31 IP31 IP31 
Drive humidity80 % up to 31 °C, 88 °F, decreasing linearly to 50 % at 40 °C, 104 °F 80 % up to 31 °C, 88 °F, decreasing linearly to 50 % at 40 °C, 104 °F 80 % up to 31 °C, 88 °F, decreasing linearly to 50 % at 40 °C, 104 °F 80 % up to 31 °C, 88 °F, decreasing linearly to 50 % at 40 °C, 104 °F 80 % up to 31 °C, 88 °F, decreasing linearly to 50 % at 40 °C, 104 °F 80 % up to 31 °C, 88 °F, decreasing linearly to 50 % at 40 °C, 104 °F 80 % up to 31 °C, 88 °F, decreasing linearly to 50 % at 40 °C, 104 °F 
Drive noise<70dB(A) at 1m <70dB(A) at 1m <70dB(A) at 1m <70dB(A) at 1m <70dB(A) at 1m <70dB(A) at 1m <70dB(A) at 1m 
Max. altitude2000 m2000 m2000 m2000 m2000 m2000 m2000 m
Drive power supply1ph, 100 V to 120 V, 220 V to 240 V 50/60 Hz, 100 VA 1ph, 100 V to 120 V, 220 V to 240 V 50/60 Hz, 100 VA 1ph, 100 V to 120 V, 220 V to 240 V 50/60 Hz, 100 VA 1ph, 100 V to 120 V, 220 V to 240 V 50/60 Hz, 100 VA 1ph, 100 V to 120 V, 220 V to 240 V 50/60 Hz, 100 VA 1ph, 100 V to 120 V, 220 V to 240 V 50/60 Hz, 100 VA 1ph, 100 V to 120 V, 220 V to 240 V 50/60 Hz, 100 VA 
Compatible tubing bore size 1.6, 3.2, 4.8, 6.4, 8 mm1.6, 3.2, 4.8, 6.4 mm1.6, 3.2, 4.8, 6.4, 8 mm0.5, 0.8, 1.6, 3.2, 4.8, 6.4, 8 mm1.6, 3.2, 4.8, 6.4, 8 mm0.13, 0.19, 0.25, 0.38, 0.5, 0.63, 0.76, 0.88, 1.02, 1.14, 1.29, 1.42, 1.52, 1.65, 1.85, 2.05, 2.29, 2.54, 2.79 mm0.13, 0.19, 0.25, 0.38, 0.5, 0.63, 0.76, 0.88, 1.02, 1.14, 1.29, 1.42, 1.52, 1.65, 1.85, 2.05, 2.29, 2.54, 2.79 mm
Compatible tubing wall thickness 1.6 mm2.4 mm1.6 mm1.6 mm2.4 mm

323 Drive with 313D pumphead dimensions

323 Drive with 314D pumphead dimensions

323 Drive with 501RL pumphead dimensions

323 Drive with 501RL2 pumphead dimensions

323 Drive with MC4 pumphead dimensions

323 Drive with MC8 pumphead dimensions

Materials of construction

BearingsCarbon steel, Sintered bronze
Drive caseworkAcrylonitrile butadiene styrene (ABS), Powder coated aluminium LM24
Guide roller assemblyDelrin
Mounting plate assemblyGlass filled Nylon, IXEF (Polyarylamide)
Pumphead body assemblyGlass filled polypropylene, Polyacrylamide—IXEF (PARA), Polycarbonate (PC), Stainless steel
Pumphead guardPolycarbonate (PC)
Pumphead roller assemblyDelrin, MoS2 filled Nylon 6 (Nylatron)
Pumphead rotor assemblyElectroless nickel plated hardened steel, Glass filled Nylon, Mazak, chromium plated
Pumphead trackPolyacrylamide—IXEF (PARA)
SpindlesElectroless nickel plated hardened steel, Stainless steel
SpringsStainless steel
Tube clamp assemblyAcetal copolymer (Kematal), Glass filled Nylon

Information listed covers the complete range. For detailed specifications of individual models/components refer to user manual or contact WMFTS representative.

Control

Control options

Functionality 323E 323S 323U 323Du
Manual control
Keypad speed control
15-400rpm 27:1 speed control
3-400rpm 133:1 speed control
1.5-220rpm 147:1 speed control
MemoDose for accurate single shot dosing
Remote control
Run/Stop, direction change via contact closure or 5V TTL
Remote operation of MemoDose (hand/foot switch)
Analogue speed control
Inputs; 0-10V or 4-20mA
RS232 digital communication
Digital serial control
Security
Keypad lock to protect set-up

Literature

Datasheet

  1. 323 Drive with MC8 pumphead datasheet (EN).pdf
    PDF - 629.3kb
  2. 323 Drive with 313D2 pumphead datasheet (EN).pdf
    PDF - 313.5kb
  3. 323 Drive with MC4 pumphead datasheet (EN).pdf
    PDF - 589.5kb
  4. 323 Drive with 314D pumphead datasheet (EN).pdf
    PDF - 899kb
  5. 323 Drive with 313D pumphead datasheet (EN).pdf
    PDF - 905.5kb
  6. 323 Drive with 501RL pumphead datasheet (EN).pdf
    PDF - 852.1kb
  7. 323 Drive with 501RL2 pumphead datasheet (EN).pdf
    PDF - 543.2kb

Manuals

  1. 323E,S,U,Du manual (EN).pdf
    PDF - 1.3mb
  2. 323Dz manual (EN).pdf
    PDF - 1.2mb

Other Resources

  1. 323ESUDuDz Eu Declaration of Conformity (EN).pdf
    PDF - 142.3kb

Order Information

Product codes

323 Drive with 313D pumphead product codes

Pumps, drives and pumpheads product codes
Description Partcode
323E/D Drive and 313D three-roller pumphead 030.3124.3D0*
323S/D Drive and 313D three-roller pumphead 030.3134.3D0*
323U/D Drive and 313D three-roller pumphead 030.3144.3D0*
323Du/D Drive and 313D three-roller pumphead 030.3154.3D0*
323Dz/D Drive and 313D three-roller pumphead 030.3184.3D0*
323E Drive only 036.3124.000*
323S Drive only 036.3134.000*
323U Drive only 036.3144.000*
323Du Drive only 036.3154.000*
313DW Three-roller pumphead for 1.6mm wall tube 033.3451.000
313X Three-roller extension pumphead for 1.6mm wall tube (maximum five) 033.3431.000

*Replace last 0 with A, E or U for American, European or UK mains supply (American 110V 1ph 60Hz)

If required for use with STA-PURE and Chem-Sure tubing, please contact Watson-Marlow Bredel technical support for drive and pumphead selection

Tubing product codes
Bore/wall (mm) Bioprene Marprene Platinum Silicone PVC
0.5 / 1.6 933.0005.016 902.0005.016 913.A005.016
0.8 / 1.6 933.0008.016 902.0008.016 913.A008.016
1.6 / 1.6 933.0016.016 902.0016.016 913.A016.016 950.0016.016
3.2 / 1.6 933.0032.016 902.0032.016 913.A032.016 950.0032.016
4.8 / 1.6 933.0048.016 902.0048.016 913.A048.016 950.0048.016
6.4 / 1.6 933.0064.016 902.0064.016 913.A064.016 950.0064.016
8.0 / 1.6 933.0080.016 902.0080.016 913.A080.016 950.0080.016
Bore/wall (mm) STA-PURE® STA-PURE®Series PCS STA-PURE®Series PFL Chem-Sure® Fluorel®
0.8 / 1.6 970.0008.016
1.6 / 1.6 960.0016.016 961.0016.016 966.0016.016 965.0016.016 970.0016.016
3.2/ 1.6 960.0032.016 961.0032.016 966.0032.016 965.0032.016 970.0032.016
4.8 / 1.6 960.0048.016 961.0048.016 966.0048.016 965.0048.016 970.0048.016
6.4 / 1.6 960.0064.016 961.0064.016 966.0064.016 965.0064.016 970.0064.016
8.0 / 1.6 960.0080.016 961.0080.016 966.0080.016 965.0080.016 970.0080.016

323 Drive with 313D2 pumphead product codes

Drives and pumpheads product codes
Description Partcode
323E Drive only 036.3124.000*
323S Drive only 036.3134.000*
323U Drive only 036.3144.000*
323Du Drive only 036.3154.000*
313DW2 Three-roller pumphead for 2.4 mm wall tube 033.3551.000

*Replace last 0 with A, E or U for American, European or UK mains supply (American 110 V 1 ph 60 Hz)

If required for use with STA-PURE and Chem-Sure tubing, please contact Watson-Marlow Bredel technical support for drive and pumphead selection

Tubing product codes
Bore/wall (mm) Bioprene Marprene Platinum Silicone
1.6 / 2.4 933.0016.024 902.0016.024 913.A016.024
3.2 / 2.4 933.0032.024 902.0032.024 913.A032.024
4.8 / 2.4 933.0048.024 902.0048.024 913.A048.024
6.4 / 2.4 933.0064.024 902.0064.024 913.A064.024
8.0 / 2.4 933.0080.024 902.0080.024 913.A080.024
Bore/wall (mm) STA-PURE® STA-PURE®Series PCS STA-PURE®Series PFL Chem-Sure®
1.6 / 2.4 960.0016.024 961.0016.024 966.0016.024 965.0016.024
3.2 / 2.4 960.0032.024 961.0032.024 966.0032.024 965.0032.024
4.8 / 2.4 960.0048.024 961.0048.024 966.0048.024 965.0048.024
6.4 / 2.4 960.0064.024 961.0064.024 966.0064.024 965.0064.024
8.0 / 2.4 960.0080.024 965.0080.024

323 Drive with 314D pumphead product codes

Drives and pumpheads product codes
Description Partcode
323Dz Drive only 036.3184.000*
314DW 4 roller extension pumphead for 1.6 mm wall tube 033.4451.000
314X 4 roller extension pumphead for 1.6 mm wall tube (maximum five) 033.4431.000

*Replace last 0 with A, E or U for American, European or UK mains supply (American 110 V 1 ph 60 Hz)

Tubing product codes
Bore/wall (mm) Bioprene Marprene Platinum Silicone PVC
0.5 / 1.6 933.0005.016 902.0005.016 913.A005.016
0.8 / 1.6 933.0008.016 902.0008.016 913.A008.016
1.6 / 1.6 933.0016.016 902.0016.016 913.A016.016 950.0016.016
3.2 / 1.6 933.0032.016 902.0032.016 913.A032.016 950.0032.016
4.8 / 1.6 933.0048.016 902.0048.016 913.A048.016 950.0048.016
6.4 / 1.6 933.0064.016 902.0064.016 913.A064.016 950.0064.016
8.0 / 1.6 933.0080.016 902.0080.016 913.A080.016 950.0080.016
Bore/wall (mm) STA-PURE® STA-PURE®Series PCS STA-PURE®Series PFL Chem-Sure® Fluorel®
0.8 / 1.6 970.0008.016
1.6 / 1.6 960.0016.016 961.0016.016 966.0016.016 965.0016.016 970.0016.016
3.2/ 1.6 960.0032.016 961.0032.016 966.0032.016 965.0032.016 970.0032.016
4.8 / 1.6 960.0048.016 961.0048.016 966.0048.016 965.0048.016 970.0048.016
6.4 / 1.6 960.0064.016 961.0064.016 966.0064.016 965.0064.016 970.0064.016
8.0 / 1.6 960.0080.016 961.0080.016 966.0080.016 965.0080.016 970.0080.016

323 Drive with 501RL pumphead product codes

Pumps, drives and pumpheads product codes
Description Partcode
323Dz/RL drive + 501RL pumphead for 1.6 mm wall tube 030.3183.RL0*
323S/RL drive + 501RL pumphead for 1.6 mm wall tube 030.3132.RL0*
323Du/RL drive + 501RL pumphead for 1.6 mm wall tube 030.3152.RL0*
323U/RL drive + 501RL pumphead for 1.6 mm wall tube 030.3142.RL0*
323S drive only 036.3132.000*
323U drive only 036.3152.000*
501RL pumphead for 1.6mm wall tube 053.0001.L00

* Replace last 0 with A, E or U for American, European or UK mains supply (American 110 V 1 ph 60 Hz)
If required for use with STA-PURE and Chem-Sure tubing, please contact Watson-Marlow Bredel technical support for drive and pumphead selection

Tubing product codes
Bore/wall (mm) Bioprene Marprene Platinum Silicone PVC
0.5 / 1.6 933.0005.016 902.0005.016 913.A005.016
0.8 / 1.6 933.0008.016 902.0008.016 913.A008.016
1.6 / 1.6 933.0016.016 902.0016.016 913.A016.016 950.0016.016
3.2 / 1.6 933.0032.016 902.0032.016 913.A032.016 950.0032.016
4.8 / 1.6 933.0048.016 902.0048.016 913.A048.016 950.0048.016
6.4 / 1.6 933.0064.016 902.0064.016 913.A064.016 950.0064.016
8.0 / 1.6 933.0080.016 902.0080.016 913.A080.016 950.0080.016
Bore/wall (mm) STA-PURE® STA-PURE®Series PCS STA-PURE®Series PFL Chem-Sure® Fluorel®
0.8 / 1.6 970.0008.016
1.6 / 1.6 960.0016.016 961.0016.016 966.0016.016 965.0016.016 970.0016.016
3.2/ 1.6 960.0032.016 961.0032.016 966.0032.016 965.0032.016 970.0032.016
4.8 / 1.6 960.0048.016 961.0048.016 966.0048.016 965.0048.016 970.0048.016
6.4 / 1.6 960.0064.016 961.0064.016 966.0064.016 965.0064.016 970.0064.016
8.0 / 1.6 960.0080.016 961.0080.016 966.0080.016 965.0080.016 970.0080.016

323 Drive with 501RL2 pumphead product codes

Pumpheads product codes
Description Partcode
501RL2 pumphead for 2.4 mm wall tube 053.0001.L20

* Replace last 0 with A, E or U for American, European or UK mains supply (American 110 V 1ph 60 Hz)
If required for use with STA-PURE and Chem-Sure tubing, please contact Watson-Marlow Bredel technical support for drive and pumphead selection

Tubing product codes
Bore/wall (mm) Bioprene Marprene Platinum Silicone
1.6 / 2.4 933.0016.024 902.0016.024 913.A016.024
3.2 / 2.4 933.0032.024 902.0032.024 913.A032.024
4.8 / 2.4 933.0048.024 902.0048.024 913.A048.024
6.4 / 2.4 933.0064.024 902.0064.024 913.A064.024
8.0 / 2.4 933.0080.024 902.0080.024 913.A080.024
Bore/wall (mm) STA-PURE® STA-PURE®Series PCS STA-PURE®Series PFL Chem-Sure®
1.6 / 2.4 960.0016.024 961.0016.024 966.0016.024 965.0016.024
3.2 / 2.4 960.0032.024 961.0032.024 966.0032.024 965.0032.024
4.8 / 2.4 960.0048.024 961.0048.024 966.0048.024 965.0048.024
6.4 / 2.4 960.0064.024 961.0064.024 966.0064.024 965.0064.024
8.0 / 2.4 960.0080.024 965.0080.024

323 Drive with MC4 pumphead product codes

Drives and pumpheads product codes
Description Partcode
323S drive only 036.3134.000*
323Du drive only 036.3154.000*
314MC four-roller five-channel pumphead 033.6453.000
314MCX four-roller five-channel extension pumphead 033.6454.000

*Replace last 0 with A, E or U for American, European or UK mains supply (American 110 V 1 ph 60 Hz)

Tubing product codes
Colour code Tube (mm) Marprene* PVC Silicone
Orange/black 0.13 981.0013.000
Orange/red 0.19 981.0019.000
Orange/blue 0.25 979.0025.000 981.0025.000
Orange/green 0.38 979.0038.000 981.0038.000
Orange/yellow 0.50 979.0050.000 981.0050.000
Orange/white 0.63 979.0063.000 981.0063.000 983.0063.000
Black/black 0.76 979.0076.000 981.0076.000 983.0076.000
Orange/orange 0.88 979.0088.000 981.0088.000 983.0088.000
White/white 1.02 979.0102.000 981.0102.000 983.0102.000
Red/red 1.14 979.0114.000 981.0114.000 983.0114.000
Grey/grey 1.29 979.0129.000 981.0129.000 983.0129.000
Yellow/yellow 1.42 979.0142.000 981.0142.000 983.0142.000
Yellow/blue 1.52 979.0152.000 981.0152.000 983.0152.000
Blue/blue 1.65 979.0165.000 981.0165.000 983.0165.000
Green/green 1.85 979.0185.000 981.0185.000 983.0185.000
Purple/purple 2.05 979.0205.000 981.0205.000 983.0205.000
Purple/black 2.29 979.0229.000 981.0229.000 983.0229.000
Purple/orange 2.54 979.0254.000 981.0254.000 983.0254.000
Purple/white 2.79 979.0279.000 981.0279.000 983.0279.000

* For autoclavable Marprene tubing, please replace last “0” with “*” - for example 979.0238.00*

323 Drive with MC8 pumphead product codes

Drives and pumpheads product codes
Description Partcode
323S Drive only 036.3134.000*
318MC eight roller five channel pumphead 033.6853.000
318MCX eight roller five channel extension pumphead 033.6854.000
323Du drive only 036.3154.000*

*Replace last 0 with A, E or U for American, European or UK mains supply (American 110 V 1 ph 60 Hz)

Tubing product codes
Colour code Tube (mm) Marprene* PVC Silicone
Orange/black 0.13 981.0013.000
Orange/red 0.19 981.0019.000
Orange/blue 0.25 979.0025.000 981.0025.000
Orange/green 0.38 979.0038.000 981.0038.000
Orange/yellow 0.50 979.0050.000 981.0050.000
Orange/white 0.63 979.0063.000 981.0063.000 983.0063.000
Black/black 0.76 979.0076.000 981.0076.000 983.0076.000
Orange/orange 0.88 979.0088.000 981.0088.000 983.0088.000
White/white 1.02 979.0102.000 981.0102.000 983.0102.000
Red/red 1.14 979.0114.000 981.0114.000 983.0114.000
Grey/grey 1.29 979.0129.000 981.0129.000 983.0129.000
Yellow/yellow 1.42 979.0142.000 981.0142.000 983.0142.000
Yellow/blue 1.52 979.0152.000 981.0152.000 983.0152.000
Blue/blue 1.65 979.0165.000 981.0165.000 983.0165.000
Green/green 1.85 979.0185.000 981.0185.000 983.0185.000
Purple/purple 2.05 979.0205.000 981.0205.000 983.0205.000
Purple/black 2.29 979.0229.000 981.0229.000 983.0229.000
Purple/orange 2.54 979.0254.000 981.0254.000 983.0254.000
Purple/white 2.79 979.0279.000 981.0279.000 983.0279.000

* For autoclavable Marprene tubing, please replace last “0” with “*” - for example 979.0238.00*

Recommended Products

  1. 300 series pumpheads

    300 series pumpheads

    Iconic flip-top pumps for medium flows to 2,000 ml/min. Extendable up to 6 channels.

    Pumpheads

  2. Bioprene: Thermoplastic tubing

    Bioprene: Thermoplastic tubing

    Thermoplastic tubing with long peristaltic life and low permeability. 5 ºC to 80 ºC (23 ºF to 176 ºF).

    Tubing - peristaltic

  3. Marprene tubing

    Marprene tubing

    Thermoplastic elastomer tubing especially resistant to oxidizing agents. 5 ºC to 80 ºC (23 ºF to 176 ºF) to 7 bar (100 psi).

    Tubing - peristaltic

  4. Pumpsil tubing

    Pumpsil tubing

    Platinum-cured silicone tubing with ultra smooth bore and excellent flow stability. -20 ºC to 80 ºC (-4 ºF to 176 ºF).

    Tubing - peristaltic

Related Products

  1. 100 series cased pump

    100 series cased pump

    Flow rates to 190 ml/min (3.04 USGPH) and pressures up to 2 bar (30 psi). Speed control up to 10,000:1.

    Pumps - cased pumps

  2. 530 process pumps

    530 process pumps

    Flow rates to 3.5 L/min (55 USGPH) and pressures up to 7 bar (100 psi). Precise 2,200:1 speed control range.

    Pumps - cased pumps

  3. 630 mid-flow process pumps

    630 mid-flow process pumps

    Flow rates to 18 L/min (4.76 USGPM) and pressures up to 4 bar (60 psi). Precise 2,650:1 speed control range.

    Pumps - cased pumps

  4. 730 process pumps

    730 process pumps

    Flow rates to 33 L/min (8.8 USGPM) and pressures up to 2 bar (30 psi). Precise 3,600:1 speed control range.

    Pumps - cased pumps

Our process pump specialists are here to help you succeed.

To order a product or ask a question

Contact our experts