Pumps - hose pumps

Bredel CIP hose pumps 20-32

Arrange a demo

Overview

Bredel CIP hose pumps 20-32

The Bredel CIP pump is built for food and beverage processes that require optimal efficiency and regular clean-in-place (CIP).

The innovative design and automatic retractable shoes are specifically designed for CIP processes ensuring contamination-free pumping, while simplifying maintenance with minimal components.

Features and benefits

Enhanced hygiene: Meets all clean-in-place (CIP) requirements, ensuring system cleanliness
Automated shoe retraction: Reverse the pump to retract shoes without manual work. Run the pump forward to effortlessly reengage shoes
Reduced power usage: During cleaning, the CIP rotor allows the shoes to be retracted and the pump turned off
Extended hose life: Reduce hose compressions, in particular, under high temperature/chemical cleaning process
Retrofittable: Minimises investment costs by allowing easy rotor replacement

Technical summary

Max. flow rate continuous	3200 L/h
Max. flow rate continuous	844 USGPH
Volume per revolution	0.152 - 0.625 L
Max. continuous operating speed	65 - 100 rpm
Max. operating pressure	16 bar
Max. operating pressure	232 psi
Min. starting torque	85 - 210 N m
Min. starting torque	752 - 1,859 in.lbs
Weight	42 - 133 kg

Technical Summary table lists features available within the range. See ‘Specifications’ tab for model specific information.

Performance

CIP 20 performance

CIP 25 performance

CIP 32 performance

Specifications

Technical specifications

	CIP 20	CIP 25	CIP 32
Max. flow rate continuous	600 L/h (158 USGPH)	1800 L/h (475 USGPH)	3200 L/h (844 USGPH)
Max. flow rate intermittent	820 L/h (216 USGPH)	2740 L/h (723 USGPH)	5250 L/h (1385 USGPH)
Volume per revolution	0.152 l (0.0402 USG)	0.3 l (0.079 USG)	0.625 l (0.165 USG)
Max. continuous operating speed	65 rpm	100 rpm	85 rpm
Max. intermittent operating speed	90 rpm	155 rpm	140 rpm
Max. operating pressure	10 bar (145 psi)	16 bar (232 psi)	16 bar (232 psi)
Max. inlet pressure	2 bar abs (30 psi abs)	3.5 bar abs (51 psi abs)	3 bar abs (44 psi abs)
Max. suction capability	9.5 mWC (374 inWC)	9.5 mWC (374 inWC)	9.5 mWC (374 inWC)
Suction capability (80% Flow rate)	9.5 mWC (374 inWC)	9.5 mWC (374 inWC)	9 mWC (354 inWC)
Operating temperature	-20 °C to 45 °C (-4 °F to 113 °F)	-20 °C to 45 °C (-4 °F to 113 °F)	-20 °C to 45 °C (-4 °F to 113 °F)
Fluid temperature	-20 °C to 80 °C (-4 °F to 176 °F)	-20 °C to 80 °C (-4 °F to 176 °F)	-20 °C to 80 °C (-4 °F to 176 °F)
Min. starting torque	85 N m (752 in.lbs)	115 N m (1018 in.lbs)	210 N m (1859 in.lbs)
Weight	42 kg (93 lbs)	92 kg (203 lbs)	133 kg (293 lbs)
Pumphead weight	25.2 kg (56 lbs)	50 kg (110 lbs)	76 kg (168 lbs)
Rotor weight	5.8 kg (13 lbs)	8 kg (18 lbs)	13 kg (29 lbs)
Hose lubricant required	0.7 l (0.2 USG)	2 l (0.53 USG)	3.5 l (0.92 USG)
Port configurations	Down, Left, Right, Up	Down, Left, Right, Up	Down, Left, Right, Up
Pumping direction	Clockwise, Counterclockwise	Clockwise, Counterclockwise	Clockwise, Counterclockwise
Compatible hose materials	CSM, EPDM, F-NBR, NBR, NBR for food, NR-Metering, NR-Transfer	CSM, EPDM, F-NBR, NBR, NBR for food, NR-Metering, NR-Transfer	CSM, EPDM, F-NBR, NBR, NBR for food, NR-Metering, NR-Transfer
Flange assembly type	ANSI, DIN, JIS	ANSI, DIN, JIS	ANSI, DIN, JIS
Sanitary connector options	DIN 11851, DIN 11864, IDF, RJT, SMS, Tri-clamp	DIN 11851, DIN 11864, IDF, RJT, SMS, Tri-clamp	DIN 11851, DIN 11864, IDF, RJT, SMS, Tri-clamp

Please consult your Bredel representative for lower or higher temperature operation. Allowable ambient temperature is based on pump capabilities and may be further limited by gearbox ambient capabilities.

CIP 20 dimensions

Type	A	A1	B	C	D	ØE	F	G	H	H1	H2max	J	K	Lmax	L1	L2max	M	N	O	ØP
Bredel CIP 20 (mm)	427	431	230	63	195	20/25.5	285	315	304	167	294	96	61	519	46	378	150	75	25	12
Bredel CIP 20 (inches)	16.8	17.0	9.1	2.5	7.7	0.8/1.0	11.2	12.4	12.0	6.6	11.6	3.8	2.4	20.4	1.8	14.9	5.9	3.0	1.0	0.5

Connector sizes	MNPT	EN DIN	JIS
Bredel CIP 20	0.75"	20mm	20mm

CIP 25 dimensions

Type	A	B	C	D	E	F	G	H	H1	H2max	J	K	Lmax	L1	L2max	M	N	O	ØP	ØQ	R
Bredel 25 (mm)	521	304	2.5	264	98	279	315	460	222	359	90	97	616	58	468	305	120	15	12	14	85
Bredel 25 (inches)	20.5	12	0.09	10.4	3.9	11	12.4	18.1	8.7	14.1	3.5	3.8	24.3	2.3	18.4	12	4.7	0.6	0.47	0.6	3.3

Connector sizes	ANSI 150#	EN DIN	JIS
Bredel 25	1"	25mm	25mm

CIP 32 dimensions

Type	A	B	C	D	E	F	G	H	H1	H2max	J	K	Lmax	L1	L2max	M	N	O	ØP	ØQ	R
Bredel 32 (mm)	631	375	2.5	330	105	324	360	538	260	402	91	93	703	68	544	370	120	20	12	18	100
Bredel 32 (inches)	24.8	14.8	0.09	13	4.1	12.8	14.2	21.2	10.2	15.8	3.6	3.7	27.7	2.7	21.4	14.6	4.7	0.79	0.47	0.71	3.94

Connector sizes	ANSI 150#	EN DIN	JIS
Bredel 32	1.25"/1.5"	32mm	32mm

Materials of construction

Hose material	CSM, EPDM, F-NBR, NBR, NBR for food, NR-Metering, NR-Transfer
Housing	Cast iron, ISO12944 category C4M
Rotor assembly	Cast iron, ISO12944 category C4M
Cover assembly	Cast iron, ISO12944 category C4M
Brackets and fasteners	Galvanised steel, Stainless steel 316
Support frame	Galvanised steel, Stainless steel 316
Hose clamps	Galvanised steel, Stainless steel 316
Coupling bush	Alloy steel
Seals	EPDM, NBR
Shoe material	Steel